Unit of competency Outline

Date retreived
22/07/2026 3:11 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct underground truck operations

Conduct underground truck operations

Unit of competency
National Code
RIIMPO210D
State Code
WH406
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
4.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
28/05/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
28/05/2014
Nominal Hours
20
Description
This unit describes a participant’s skills and knowledge required to conduct underground truck operations in Metalliferous mining.This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for underground truck operations
  • 1.1 Access, interpret and apply underground tuck operations documentation and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Identify and address potential risks, hazards and environmental issues and implement control measures
  • 1.4 Select and wear personal protective equipment appropriate for work activities
  • 1.5 Perform equipment pre-start checks and ensure equipment is ready for operation
  • 1.6 Carry out start-up procedures
  • 1.7 Inspect and assess site conditions to determine if scaling is required and take action according to site requirements
  • 1.8 Adhere to emergency procedures and ensure safety of others, equipment and site
  • 1.9 Use approved dust suppression and extraction methods
  • 1.10 Communicate to others verbally or in writing end of shift information to oncoming shift
2. Load material
  • 2.1 Check work area for spillage prior to entering the loading area to prevent plant and tyre damage
  • 2.2 Position truck for loading clear of services
  • 2.3 Remain in truck when loading or at safe distance from loading operation
3. Haul material
  • 3.1 Drive and operate truck safely within working environment limitations and road conditions, observing safe driving conventions
  • 3.2 Confirm type of material and haul to designated location
  • 3.3 Communicate with others using site communication systems and methods
  • 3.4 Maintain hauling efficiency by managing working environment
  • 3.5 Monitor and manage equipment performance using appropriate indicators to aid efficient operations
  • 3.6 Identify, remove, and dispose of contaminants
  • 3.7 Identify and manage spillages on hauling surface
  • 3.8 Ensure tray is in the correct position before equipment is in motion
4. Discharge material
  • 4.1 Check safety provisions are in place before entering and leaving tipping site
  • 4.2 Position truck in safe area
  • 4.3 Discharge load
  • 4.4 Lower or retract tray fully before driving off the tipping area
5. Carry out operator maintenance
  • 5.1 Carry out shutdown procedures
  • 5.2 Service and make minor adjustments to equipment
6. Conduct housekeeping activities
  • 6.1 Clean equipment to maintain condition of equipment and ensure safe and efficient operations
  • 6.2 Manage and/or report hazards to maintain a safe working environment
No information
No information
Replaces
State Code National Code Title Type
WB322 RIIMPO210A Conduct underground truck operations Unit of competency
Replaced By
State Code National Code Title Type
OAK73 RIIMPO210E Conduct underground truck operations Unit of competency