Unit of competency Outline

Date retreived
22/07/2026 1:41 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Undertake towing underground

Undertake towing underground

Unit of competency
National Code
RIIMPO202D
State Code
WH400
TGA Status
Deleted
DTWD Status
Transition (Deleted)
Current Release Number
4.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
28/05/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
28/05/2014
Nominal Hours
20
Description
This unit describes a participant’s skills and knowledge required to undertake towing underground in Metalliferous mining.This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for towing underground
  • 1.1 Access, interpret and apply towing in underground metalliferous mines documentation and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Identify and address potential risks hazards and environmental issues and implement control measures
  • 1.4 Select and wear personal protective equipment appropriate for work activities
  • 1.5 Select appropriate type of towing equipment according to job type and specifications, and check equipment for serviceability and rectify or report any faults
  • 1.6 Communicate with other equipment operators and personnel using approved communication methods
  • 1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
  • 1.8 Ensure area is well ventilated before entry into work area
2. Shackle and hitch vehicle/equipment
  • 2.1 Carry out equipment pre-start checks and start-up procedures
  • 2.2 Identify towing/lifting points on vehicle/equipment
  • 2.3 Select suitable towing equipment for type and size of vehicle/equipment
  • 2.4 Hitch towing equipment to vehicle/equipment using approved method
  • 2.5 Confirm security and balance of hitch prior to commencing tow
3. Tow and unhitch vehicle/equipment
  • 3.1 Tow vehicle, observing safe driving conventions, and following site procedures for towing
  • 3.2 Continually monitor hazards and risks, and ensure safety of self, other personnel, plant and equipment
  • 3.3 Monitor condition of ground and hitch and adjust towing accordingly
  • 3.4 Proceed to destination using the safest and most direct route
  • 3.5 Unhitch vehicle/equipment in authorised area
4. Carry out post-operational procedures
  • 4.1 Inspect, fault find and report faults
  • 4.2 Carry out routine operator servicing, maintenance and housekeeping tasks
  • 4.3 Clean and store towing vehicle/equipment, ensure suitability for use, and address/report issues
  • 4.4 Complete all written documentation and communications clearly, concisely and on time
No information
No information
No information