Unit of competency Outline

Date retreived
22/07/2026 1:28 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct tele-remote operations

Conduct tele-remote operations

Unit of competency
National Code
RIIUND307D
State Code
WH724
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
28/05/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
28/05/2014
Nominal Hours
30
Description
This unit describes a participant’s skills and knowledge required to conduct tele-remote operations in Metalliferous Mining. This unit is appropriate for those working in operational roles. Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare to conduct tele-remote control operations
  • 1.1 Access, interpret and apply tele-remote control operations documentation and ensure the work activity is compliant
  • 1.2 Obtain, interpret, clarify and confirm work requirements and shift changeover details before proceeding
  • 1.3 Select and wear appropriate personal protective equipment for work activity
  • 1.4 Select appropriate type of tele-remote equipment
  • 1.5 Perform equipment pre-start checks
  • 1.6 Identify, address and report potential risks, hazards and environmental issues
  • 1.7 Carry out start-up, park and shutdown procedures
  • 1.8 Confirm location and construction of remoting area
  • 1.9 Erect barricades or signage and/or safety provisions where appropriate to prevent unauthorised access
  • 1.10 Obtain and interpret emergency procedures and be prepared for fire/accident/emergency
  • 1.11 Inspect and assess site conditions to determine if scaling is required and take action
  • 1.12 Use approved dust suppression and extraction methods
  • 1.13 Ensure area is well ventilated before entry into work area
2. Setup tele-remote operation
  • 2.1 Check transmitter functions for correct operation
  • 2.2 Ensure communication is available for operator at all times during operation
  • 2.3 Confirm operation of visible warning lights
  • 2.4 Check receiver and cameras are installed and operating correctly
  • 2.5 Ensure proximity device or barrier is operational
  • 2.6 Activate/erect warning signs in control room
3. Conduct tele-remoting
  • 3.1 Monitor control room indicators for equipment and environment feedback
  • 3.2 Maintain constant control of remote equipment
  • 3.3 Continuously assess ground conditions and determine safest operating method and efficiency of operations
  • 3.4 Identify cause when proximity sensors are activated and report incident
  • 3.5 Reset proximity sensors
  • 3.6 Shutdown and secure remote controls whilst not in use
  • 3.7 Complete all required documentation clearly, concisely and on time
  • 3.8 Pass on end-of-shift information to oncoming shift
4. Carry out operator maintenance
  • 4.1 Carry out operator maintenance
  • 4.2 Carry out park-up and shutdown procedures
  • 4.3 Service and make minor adjustments to equipment
  • 4.4 Visually inspect equipment, report faults and make equipment available for operational maintenance
5. Conduct housekeeping activities
  • 5.1 Clean equipment and remoting area
  • 5.2 Clean and store auxiliary service equipment
  • 5.3 Complete all required records and documentation accurately
No information
No information
Replaces
State Code National Code Title Type
WB527 RIIUND307A Conduct tele-remote operations Unit of competency