Unit of competency Outline

Date retreived
23/07/2026 9:34 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install and upgrade locks and hardware

Install and upgrade locks and hardware

Unit of competency
National Code
MEM20003
State Code
OAU07
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
26/06/2019
View on TGA
State Implementation and Classification
Approved Date
24/01/2020
Field of Education
030715 - Precision Metalworking
Original Release Date
24/01/2020
Nominal Hours
36
Description
This unit of competency defines the skills and knowledge required to install and upgrade locks/locking systems and lock furniture, including providing advice on installation and upgrade requirements and instructing clients on the use of the product. It applies across commercial, industrial and domestic applications and work would mainly be carried out off-site.Where fitting of door control devices is required unit MEM20005 Install and maintain door control devices/systems should also be selected.No licensing, legislative or certification requirements apply to this unit at the time of publication. Band: AUnit Weight: 4
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Determine job requirements from specifications, drawings, job sheets or work instructions
  • 1.4 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.5 Advise customer of products, product options and possible upgrade options in accordance with SOPs and customer requirements
  • 1.6 Establish installation procedure in accordance with work order and with minimal disruption to customer, services or normal work routines
2 Organise and prepare installation
  • 2.1 Select and obtain appropriate and serviceable tools, equipment, and materials in accordance with SOPs and fitting requirements
  • 2.2 Establish access to site and specific site requirements, and make appropriate arrangements in accordance with client and organisational requirements
  • 2.3 Establish and maintain a safe worksite in accordance with legislative and organisational requirements
3 Install and upgrade locks and hardware
  • 3.1 Prepare installation location, measure and mark out, as appropriate
  • 3.2 Fit locks and hardware in accordance with manufacturer specifications and SOPs
  • 3.3 Check lock and hardware for correct functioning and rectify operational problems
  • 3.4 Carry out work using safe work procedures and practices and in accordance with applicable legislation, codes, regulations and standards
  • 3.5 Identify problems affecting the installation and discuss and resolve variations with appropriate persons
4 Complete the installation
  • 4.1 Ensure work site is cleaned and left in presentable condition in accordance with original presentation, client requirements, industry standards and SOPs
  • 4.2 Undertake final inspections and rectify non-conformance to ensure installation conforms to industry, legislative and order requirements
  • 4.3 Notify client of job completion and obtain client acceptance in accordance with SOPs
  • 4.4 Instruct client on use of product in accordance with SOPs and manufacturer specifications
  • 4.5 Complete relevant documentation and process in accordance with industry, legislative and organisational requirements
No information
No information
Replaces
State Code National Code Title Type
W5664 MEM20003A Install and upgrade locks and hardware Unit of competency
Replaced By
State Code National Code Title Type
OEX54 MEM20024 Install and upgrade locks and hardware Unit of competency