Unit of competency Outline

Date retreived
22/07/2026 4:58 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove and replace major welded panels on vehicles

Remove and replace major welded panels on vehicles

Unit of competency
National Code
AURVTN020
State Code
AWZ77
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030509 - Automotive Body Construction
Original Release Date
13/07/2016
Nominal Hours
48
Description
This unit describes the performance outcomes required to remove and replace vehicle welded panels and panel sections. It involves preparing for the task, selecting and using specialist tools and equipment, removing, repairing, aligning and welding major vehicle panels and sections, finishing repair to pre-paint condition, and completing workplace processes and documentation.It applies to those working in the automotive body repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to replace major welded panels
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Vehicle specifications and original equipment manufacturer (OEM) or authorised agency’s recommended repair procedures are sourced and checked against workplace instructions
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Tools and equipment are selected and checked for serviceability
  • 1.5 Work is planned to identify methods, minimise waste, and use time efficiently
2. Remove welded panels
  • 2.1 Major welded panels and sections are removed according to OEM or authorised agency’s approved methods and safety and environmental requirements
  • 2.2 Spot welds are drilled out using recommended drill bit and drill diameters
  • 2.3 Assistance is sought from authorised personnel where removal of welded panels and sections disturbs vehicle trim or electrical, mechanical or air conditioning systems
3. Replace and align welded panels
  • 3.1 Panel sections are replaced, aligned and welded using approved OEM or authorised agency’s methods and procedures
  • 3.2 Replacement, alignment and welding of panel section are carried out to pre-paint condition
4. Complete work processes
  • 4.1 Final inspection is made to ensure work meets workplace expectations and manufacturer specifications, and panels are presented ready for painting
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF506 AURVTN3020 Replace major welded panels Unit of competency
Replaced By
State Code National Code Title Type
OCL66 AURVTN120 Remove and replace major welded panels on vehicles Unit of competency
State Code National Code Title Type
BAB7 AUR32116 Certificate III in Automotive Body Repair Technology Qualification