Unit of competency Outline
Date retreived
22/07/2026 6:50 AM AWST
22/07/2026 6:50 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
FABRICATE SIMPLE SHIPBOARD COMPONENTS
FABRICATE SIMPLE SHIPBOARD COMPONENTS
Unit of competency
National Code
TDMMB3707B
TDMMB3707B
State Code
S5361
S5361
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
25/01/2008
Field of Education
031701 - Maritime Engineering
Original Release Date
25/01/2008
Nominal Hours
50
Description
UNIT DESCRIPTOR:This unit involves the skills and knowledge required of an Engineer Class 3 to fabricate simple shipboard components where required as part of maintenance of shipboard machinery on commercial vessels powered by main propulsion machinery of less than 3,000 kW of propulsion power within offshore limits.
Notes
Elements and Performance Criteria
1 Obtain specifications and drawing for component
- a The specifications and drawings for a simple component are obtained or sketched in accordance with established procedures
- b The specifications and drawings are interpreted and the processes for the fabrication and assembly of the component are planned in accordance with the limits of responsibility of an Engineer Class 3
- c Appropriate action is taken to prevent damage in accordance with vessel's planned maintenance system or procedures, established marine engineering practice, safety regulations and manufacturer's instructions
- d Faulty equipment and components are identified and are reported and appropriate action is initiated as required for isolation, tagging and repair or replacement within the limits of responsibility of an Engineer Class 3
- e Decisions are made to carry out temporary or permanent repairs depending on the vessel's position and circumstances
- f Appropriate consultation is undertaken with classification society and marine administration concerning the nature of the repairs and any contingency or emergency action required
- g Management of the repair processes and the organisation and control of engine room personnel to facilitate repairs is carried out within the limits of responsibility of an Engineer Class 3
2 Fabricate required component
- a Materials and equipment for the planned fabrication processes are selected and obtained
- b Materials are laid out and marked up in accordance with plans and specifications
- c Equipment and tools to carry out the fabrication processes are prepared and set up in accordance with manufacturer's instructions and established procedures
- d Materials are cut to specifications in accordance with planned procedures
- e Planned fabrication and assembly processes are carried out within the limits of responsibility of an Engineer Class 3
- f Fabricated component is checked against specifications
- g Equipment and unused materials are returned to store after completion of the fabrication tasks
- h Housekeeping of the work area is completed in accordance with established procedures
3 Complete documentation
- a Details of the fabrication project are documented in accordance with established maintenance procedures
4 Follow safety and hazard control procedures
- a Safety, hazard minimisation and pollution control procedures and regulations are followed at all times during fabrication activities
- b Fabrication hazards are identified and action is taken to minimise or eliminate risk to personnel, vessel and the environment
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| S2077 | TDMMB3701A | Fabricate simple shipboard components | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WH825 | MARC018 | Employ tools, equipment and materials in a shipboard context | Unit of competency |
| WG401 | MARC5001A | Employ tools, equipment and materials in a shipboard context | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| S528 | TDM50407 | Diploma of TRANSPORT & DISTRIBUTION (COASTAL MARINE ENGINEERING - ENGINEER CLASS 3) | Qualification |