Unit of competency Outline

Date retreived
22/07/2026 3:18 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform process control room operations

Perform process control room operations

Unit of competency
National Code
RIIPRO302D
State Code
WH597
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
29/05/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
29/05/2014
Nominal Hours
60
Description
This unit develops a participant’s skills and knowledge required to perform process control room operations in Coal and Metalliferous mining and Extractive.This unit is appropriate for those working in operational rolesNo licensing, legislative or certification requirements apply to this unit at the time of publication
Notes
Elements and Performance Criteria
1. Plan and prepare for process control room operations
  • 1.1 Access, interpret and apply process control room operations documentation and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Identify and address potential risks, hazards and environmental issues, and implement control measures
  • 1.4 Select and wear correct personal protective equipment appropriate for work activities
  • 1.5 Establish and maintain communications with other personnel using approved communication methods
  • 1.6 Check maintenance and operating records and document outstanding maintenance inspections and identified defects
  • 1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
2. Perform start-up operations
  • 2.1 Confirm plant readiness for operation
  • 2.2 Complete computer systems and equipment pre-start checks
  • 2.3 Carry out start-up checks and procedures according to plant configurations and system requirements
  • 2.4 Start-up individual plant and process and entire system
  • 2.5 Build production rate steadily with no surges and lulls
  • 2.6 Stabilise plant operation to meet process output and quality requirements
3. Monitor and manage operations
  • 3.1 Monitor and manage processing utilising appropriate indicators for safe and efficient operations
  • 3.2 Read and interpret data from equipment indicators, programmable logic and SCADA, and take action where required to maintain operations according to operating parameters
  • 3.3 Identify, manage and report faults to appropriate personnel in a timely manner
  • 3.4 Coordinate support personnel and ensure continuity of process
  • 3.5 Manage material flow within specified parameters
  • 3.6 Respond to alarms , investigate conditions, and take corrective actions
  • 3.7 Complete the work plan
  • 3.8 Maintain, process and pass on written records and reports
4. Conduct housekeeping activities
  • 4.1 Clear work area and dispose of or recycle materials
  • 4.2 Clean and maintain condition of equipment, ensure suitability for use, and address/report issues
  • 4.3 Manage/report hazards, and maintain a safe working environment
  • 4.4 Process written records
5. Shutdown in sequence and/or isolate plant and equipment
  • 5.1 Shutdown/isolate plant and equipment based on process or safety requirements
  • 5.2 Perform post shutdown/isolation checks
No information
No information
Replaces
State Code National Code Title Type
WB623 RIIPRO302A Perform process control room operations Unit of competency