Unit of competency Outline

Date retreived
22/07/2026 11:06 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct face loader operations

Conduct face loader operations

Unit of competency
National Code
RIIMPO313E
State Code
OAK61
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
11/12/2018
View on TGA
State Implementation and Classification
Approved Date
27/03/2019
Field of Education
030717 - Plant And Machine Operations
Original Release Date
27/03/2019
Nominal Hours
50
Description
This unit describes the skills and knowledge required to conduct face loader operations.This unit applies to those working in site-based roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors, and must be sourced from state jurisdictions prior to applying the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for face loader operations
  • 1.1 Access, interpret and apply face loader operations documentation
  • 1.2 Obtain, interpret, clarify and confirm work requirements
  • 1.3 Identify hazards and environmental issues, assess the risks and implement control measures in line with workplace policies
  • 1.4 Select and wear personal protective equipment required for work activities
  • 1.5 Access, interpret and clarify geological and survey data required to complete the work activity
  • 1.6 Inspect and prepare work area in coordination with others in line with workplace requirements
  • 1.7 Select required face loader equipment and confirm suitability for work activities
  • 1.8 Obtain and interpret emergency procedures for face loaders, and be prepared for fires, accidents and emergencies
  • 1.9 Coordinate and communicate planned activities with others at the site prior to commencement of work activity
2. Operate face loader in line with established requirements to complete work activity
  • 2.1 Carry out prestart and start-up checks in line with workplace procedures
  • 2.2 Identify faults or defects and rectify or report within scope of own responsibility and according to workplace procedures
  • 2.3 Drive and operate loader using techniques suited to equipment capabilities, site and work conditions, and according to workplace procedures
  • 2.4 Distribute bulk materials into haulage units, maintaining stability and maximum load requirements of the haul unit
  • 2.5 Load bulk materials into materials handling equipment
  • 2.6 Carry out dumping and stockpiling operations
  • 2.7 Connect and tow equipment and plant safely, within equipment and connection capacity
  • 2.8 Monitor and manage equipment performance using indicators and alarms
  • 2.9 Monitor hazards and risks during operations, and ensure safety of self, other personnel, plant and equipment
  • 2.10 Park up, shut down, secure and carry out post operational inspection of equipment in line with workplace procedures
3. Conduct housekeeping activities
  • 3.1 Clear work area and dispose or recycle materials according to workplace procedures
  • 3.2 Manage and/or report hazards to maintain a safe working environment
  • 3.3 Complete and file or distribute documentation in a manner that complies with workplace practices
No information
No information
Replaces
State Code National Code Title Type
WH418 RIIMPO313D Conduct face loader operations Unit of competency