Unit of competency Outline

Date retreived
22/07/2026 7:59 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct face loader operations

Conduct face loader operations

Unit of competency
National Code
RIIMPO313D
State Code
WH418
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
5.00
Current Release Date
14/12/2015
View on TGA
State Implementation and Classification
Approved Date
28/05/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
28/05/2014
Nominal Hours
50
Description
This unit describes a participant’s skills and knowledge required to conduct face loader operations in Metalliferous mining and Extractive.This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for face loader operations
  • 1.1 Access, interpret and apply face loader operations documentation and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Identify and address risks, hazards and environmental issues and implement control measures
  • 1.4 Select and wear personal protective equipment appropriate for work activities
  • 1.5 Access, interpret and clarify geological and survey data required to complete the allocated work
  • 1.6 Inspect and prepare work area in coordination with others
  • 1.7 Select, and check for faults, equipment and/or attachments for work activities
  • 1.8 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
2. Operate face loader
  • 2.1 Coordinate activities with others at the site prior to commencement of, and during, the work activity
  • 2.2 Carry out pre-start, start-up, park-up, shutdown and secure equipment procedures
  • 2.3 Drive loader, select and modify the operating technique to meet changing work conditions
  • 2.4 Distribute bulk materials into haulage units, and ensure maintenance of the stability and maximum load requirements of the haul unit
  • 2.5 Load bulk materials into materials handling equipment
  • 2.6 Carry out dumping and stockpiling operations
  • 2.7 Connect and tow equipment and plant safely, within equipment and connection capacity
  • 2.8 Act on or report monitoring systems and alarms
  • 2.9 Continually monitor hazards and risks, and ensure safety of self, other personnel, plant and equipment
  • 2.10 Complete the work plan, within the operating capacities of the equipment
3. Carry out operator maintenance
  • 3.1 Prepare machine for maintenance
  • 3.2 Conduct inspection and fault finding
  • 3.3 Carry out scheduled maintenance tasks
  • 3.4 Return machine to service
  • 3.5 Process written maintenance records
4. Conduct housekeeping activities
  • 4.1 Clear work area and dispose of or recycle materials
  • 4.2 Process records
No information
No information
Replaces
State Code National Code Title Type
D9350 RIIMPO313B Conduct face loader operations Unit of competency
Replaced By
State Code National Code Title Type
OAK61 RIIMPO313E Conduct face loader operations Unit of competency