Unit of competency Outline

Date retreived
23/07/2026 12:12 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Construct and evaluate prototypes and samples

Construct and evaluate prototypes and samples

Unit of competency
National Code
MSFFDM4003
State Code
ODZ70
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
03/06/2022
View on TGA
State Implementation and Classification
Approved Date
15/11/2022
Field of Education
100599 - Graphic And Design Studies, N.e.c.
Original Release Date
15/11/2022
Nominal Hours
145
Description
This unit describes the skills and knowledge required to construct and evaluate, or oversee the construction and evaluation of, prototypes and samples based on established plans, drawings or specifications. Prototypes may be produced by hand, by using appropriate machines, tools and equipment, or by computer-assisted production, and may require the application of joinery, construction and finishing techniques.The unit applies to individuals working in an industry operation of any size, or a design studio environment, who produce prototypes, either alone or as part of an internal or external team.No licensing or certification requirements apply to this unit at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Establish work requirements
  • 1.1 Identify purpose of prototype or sample from prototype specifications
  • 1.2 Identify materials specifications for item from prototype specifications and workplace documentation
  • 1.3 Identify and verify ergonomic requirements from prototype specifications
  • 1.4 Identify construction requirements and methods for materials being used from prototype specifications
2. Plan for prototype construction
  • 2.1 Prepare work plan for item, including construction stages or steps, checkpoints for measurements and tests, and assembly methods, to ensure requirements will be met
  • 2.2 Ensure work health and safety requirements, including personal protection needs, are met throughout the work
  • 2.3 Verify design brief and work plan, including compatibility of materials, with appropriate personnel and in accordance with workplace procedures
  • 2.4 Locate suitable work area and ensure it is ready for work operation in accordance with workplace procedures
3. Obtain materials and equipment
  • 3.1 Acquire correct type and quantity of material and other components to be used from specifications and ensure they are ready for use
  • 3.2 Select suitable equipment based on work requirements and selected materials, and check operational effectiveness in accordance with manufacturer specifications
  • 3.3 Identify and adjust jigs and other construction aids to suit work
4. Construct the prototype or sample
  • 4.1 Follow work plan to construct item, referencing any sketches and other job specifications
  • 4.2 Conduct checks at identified points and in accordance with workplace procedures
  • 4.3 Identify, document and implement, within workplace procedures, any required modifications to design or plan
  • 4.4 Perform initial inspection of prototype or sample to ensure it is fit for purpose
5. Finalise the work sequence
  • 5.1 Prepare product for finishing in accordance with design specification
  • 5.2 Clean, maintain and store tools and equipment in accordance with manufacturer specifications
  • 5.3 Clean and clear work area, including applying waste management strategies in accordance with workplace procedures
  • 5.4 Complete required workplace documentation
6. Evaluate prototype or sample
  • 6.1 Evaluate prototype or sample for functionality and aesthetic appeal against design brief
  • 6.2 Assess elements and principles of design of prototype or sample against design brief
  • 6.3 Assess technical integrity of prototype or sample against design brief
  • 6.4 Verify that ergonomic requirements are met from design requirements
  • 6.5 Modify prototype or sample as needed to satisfy requirements of design brief and document any unresolvable variations
  • 6.6 Review prototype or sample with client to ensure it meets requirements
  • 6.7 Record process faults in prototype or sample and report to appropriate personnel in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WI286 MSFFDT4005 Construct and evaluate furniture prototypes and samples Unit of competency
WI455 MSFFT4006 Construct prototypes and samples Unit of competency
State Code National Code Title Type
BHR4 MSF40222 Certificate IV in Furniture Design and Manufacturing Qualification