Unit of competency Outline

Date retreived
22/07/2026 6:47 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Construct prototypes and samples

Construct prototypes and samples

Unit of competency
National Code
MSFFT4006
State Code
WI455
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
20/06/2014
Field of Education
030113 - Cabinet Making
Original Release Date
20/06/2014
Nominal Hours
160
Description
This unit of competency covers the construction of prototypes and samples in accordance with established plans, drawings or specifications using hand and power tools, basic static and specialised machines, and applying joinery, construction and finishing techniques.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Establish the work requirements
  • 1.1 Purpose of the prototype or sample is identified from plans and drawings
  • 1.2 Materials specifications for the item are identified from workplace documentation
  • 1.3 Ergonomic requirements are identified, clarified and satisfied throughout the work process
  • 1.4 Construction requirements and methods are identified appropriate for the materials used
2 Plan prototype or sample construction
  • 2.1 Work plan for the item construction is drafted
  • 2.2 Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
  • 2.3 Compatibility of materials in specifications is checked and any discrepancies reported
  • 2.4 Steps or stages in construction are identified, noting checkpoints for measurements and tests
  • 2.5 Suitable work area is located and cleared ready for work
3 Obtain materials and equipment
  • 3.1 Materials are selected according to specifications and assembled ready for use
  • 3.2 Compatibility of materials with specifications is checked and any discrepancies reported
  • 3.3 Equipment and accessories suitable for working the specified material are assembled
  • 3.4 Appropriate jigs and other construction aids are identified and, where required, adjusted to suit the work
4 Construct the prototype or sample
  • 4.1 Work plan is followed to construct the item
  • 4.2 Checks are conducted at the identified points
  • 4.3 Modifications to designs and plans are identified and recommended within workplace procedures
  • 4.4 Modifications to the plan are documented and followed
  • 4.5 Prototype or sample is checked for fitness for purpose
5 Finalise the work sequence
  • 5.1 The product is prepared for finishing in accordance with the design specification
  • 5.2 Tools and equipment are cleaned, maintained and stored in accordance with manufacturer specification
  • 5.3 Work area is cleared and waste removed
  • 5.4 Workplace documentation and/or reports are completed
No information
No information
Replaces
State Code National Code Title Type
W8643 LMFFT4006B Construct prototypes and samples Unit of competency
Replaced By
State Code National Code Title Type
ODZ70 MSFFDM4003 Construct and evaluate prototypes and samples Unit of competency
State Code National Code Title Type
J742 MSF40213 Certificate IV in Furniture Design and Technology Qualification