Unit of competency Outline
Date retreived
22/07/2026 11:09 AM AWST
22/07/2026 11:09 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Modify control systems
Modify control systems
Unit of competency
National Code
MEM10007
MEM10007
State Code
OAV77
OAV77
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
Field of Education
031301 - Electrical Engineering
Original Release Date
Nominal Hours
54
Description
This unit of competency defines the skills and knowledge required to plan the commissioning procedure, assess the control system performance, adjust the control system and undertake commissioning modifications.Some jurisdictions may require the holder of this unit using the refrigeration and air conditioning pathways to be licensed or certified and users should check with the relevant authorities.Band: BUnit Weight: 6
Notes
Elements and Performance Criteria
1 Determine job requirements
- 1.1 Follow standard operating procedures (SOPs)
- 1.2 Comply with work health and safety (WHS) requirements at all times
- 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
- 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Plan commissioning procedure
- 2.1 Determine control system format and understand operational intent
- 2.2 Sequence commissioning procedures effectively to meet requirement of components and control application
3 Check control system installation
- 3.1 Verify correct installation of system components against specifications
- 3.2 Ensure appropriate test equipment is functional and calibrated before use
- 3.3 Ensure components or control loop/system is powered up and checked for correct supply in accordance with specifications
- 3.4 Ensure all readings/measurements are obtained, interpreted and recorded
4 Adjust control system and assess performance
- 4.1 Adjust control loop/system components to meet control characteristics, application and process specifications utilising appropriate techniques
- 4.2 Make final verifications including any operational adjustments to ensure required performance
5 Commission modifications
- 5.1 Ensure necessary modifications to change performance in order to meet manufacturers' or operational specifications or safety and legislative requirements are undertaken or actioned
- 5.2 Provide reports on system/process characteristics for warranty, handover and legislative purposes
- 5.3 Document all modifications and record result according to SOPs
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W5462 | MEM10007C | Modify control systems | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BEJ8 | MEM40119 | Certificate IV in Engineering | Qualification |
| BEK0 | MEM50119 | Diploma of Engineering - Advanced Trade | Qualification |