Unit of competency Outline

Date retreived
22/07/2026 1:53 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform process plant inspections

Perform process plant inspections

Unit of competency
National Code
UEPOPS209
State Code
OAH38
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
31/10/2018
State Implementation and Classification
Approved Date
15/05/2019
Field of Education
031311 - Powerline Installation And Maintenance
Original Release Date
15/05/2019
Nominal Hours
27
Description
This unit involves the skills and knowledge required to conduct an inspection of electric power generating plant and associated equipment.Aninspectionis an organisedexamination of power generation plant and equipment exposed to conditions that can cause deterioration. Power generation plant and equipment should be inspected at regular intervals. Competency in this unit requires the ability to inspect power generating plant, gain safe access to work area for inspection, conducting inspections and reporting and/or recording the results. Individuals will, in general, work under supervision, in a power generation facility as an operator. Power generation plant operators are typically trained and authorised to isolate, prepare plant and issue permits to work.No licensing, legislative or certification requirements apply to this unit at the time of publication.Note: Workplace practiceThe application of the skills and knowledge described in this unit may require a licence or training permit to practice in the workplace, where work is carried out on gas and electrical installations. Additional conditions may apply under state and territory legislative and regulatory licensing requirements.
Notes
Elements and Performance Criteria
1 Prepare for power plantinspection
  • 1.1 Maintenance and operating history for inspection is obtained, in accordance with workplace procedures for process plant to be inspected
  • 1.2 Inspection requirements for power generation plant are determined and confirmed, in accordance with workplace procedures and Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations
  • 1.3 Appropriate inspection check lists recording equipment and personal protective equipment are obtained, in accordance with workplace procedures for process plant to be inspected
  • 1.4 Availability and access to power generation plant is determined, in accordance with workplace procedures and isolation processes
  • 1.5 Hazards are identified in preparations for plant inspection and risk control measures are implemented, in accordance with workplace procedures
2 Inspect electric power generating plant
  • 2.1 Power generation plant is inspected, in accordance with workplace procedures and industry standards
  • 2.2 Power generation plant is identified and operational status is determined, in accordance with workplace procedures
  • 2.3 Inspection is conducted using approved methods, in accordance with workplace procedures
  • 2.4 Inspection requirements are completed, in accordance with workplace procedures
3 Complete documentation
  • 3.1 Records are updated, in accordance with workplace procedures
  • 3.2 Documentation is maintained, in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WE308 UEPOPS209B Perform process plant inspections Unit of competency
Replaced By
State Code National Code Title Type
ODX79 UEPOPS122 Perform process plant inspections Unit of competency