Unit of competency Outline

Date retreived
22/07/2026 11:00 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Document equipment installation requirements

Document equipment installation requirements

Unit of competency
National Code
CUAWOR301
State Code
WI247
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
15/01/2016
View on TGA
State Implementation and Classification
Approved Date
16/05/2014
Field of Education
031303 - Electronic Engineering
Original Release Date
16/05/2014
Nominal Hours
15
Description
This unit describes the performance outcomes, skills and knowledge required to document requirements for installing equipment in areas such as lighting, audio and vision for productions in the screen, media, entertainment and events industries.At this level, individuals are expected to use some discretion and judgement and they operate under broad supervision within an established framework of plans and procedures.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to document installation requirements
  • 1.1 Discuss technical installation requirements with relevant personnel to determine types of working documents required
  • 1.2 Clarify own level of responsibility in documenting equipment installation requirements
  • 1.3 Check version control information on plans, drawings and specifications to ensure use of current documents
  • 1.4 Analyse material and seek clarification on issues as required
  • 1.5 Check plans and specifications for compliance with relevant regulatory requirements
2. Complete documentation
  • 2.1 Calculate or estimate length and number of cable and multicore runs required
  • 2.2 Refine accuracy of estimates by taking measurements in venues or on location as required
  • 2.3 Calculate weight of each section of rigged equipment and check weight calculations against weight-bearing capacity of rigging points and support structures
  • 2.4 Calculate power requirements, component loadings and perform other calculations relevant to the type of installation
  • 2.5 Determine patching and routing requirements
3. Finalise documentation requirements
  • 3.1 Bring calculations with unsatisfactory results or compliance concerns to attention of supervisor
  • 3.2 Use calculations and estimates to prepare and submit working documents within agreed timeframes
  • 3.3 Seek feedback on quality of working documents from relevant personnel and note areas for future improvement
No information
No information
No information