Unit of competency Outline

Date retreived
22/07/2026 2:12 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Manually produce basic screen prints

Manually produce basic screen prints

Unit of competency
National Code
ICPSP271C
State Code
D3221
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
05/07/2010
View on TGA
State Implementation and Classification
Approved Date
07/03/2013
Field of Education
030103 - Printing
Original Release Date
07/03/2013
Nominal Hours
30
Description
This unit describes the performance outcomes, skills and knowledge required to manually produce one- or two-colour screen prints.
Notes
Elements and Performance Criteria
1. Load substrate
  • 1.1. Substrate is checked for conformance to job specifications with any irregularities reported and/or rectified
  • 1.2. Substrate position and stencil registration are adjusted according to job specifications
2. Apply ink to screen
  • 2.1. Ink is applied to the screen in the quantity required for the screen size
  • 2.2. Equipment is kept clean and spillage is minimised
  • 2.3. Ink is checked for conformance to job specifications
3. Produce proof print
  • 3.1. Proof print is run off and checked for colour, strength, registration, adhesion, clarity, gloss level, drying/curing, artwork detail and other technical aspects according to job specifications
  • 3.2. Adjustments are made as required
  • 3.3. Appropriate approval to commence production is sought prior to commencement
  • 3.4. Belt speed and energy required are set to achieve desired curing or drying properties
4. Run job and monitor print quality
  • 4.1. Printing speed production is adjusted to maximise quality and output
  • 4.2. Print quality is continuously evaluated and adjusted as required
  • 4.3. Effects of ink alterations during run are monitored and any discrepancy is notified according to enterprise procedures
  • 4.4. Workplace documentation on job is completed as required
  • 4.5. Curing and drying are constantly monitored and adjusted according to manufacturer's/ supplier's and job specifications
5. Carry out routine user maintenance
  • 5.1. Equipment is cleaned according to enterprise procedures
  • 5.2. Fault conditions are identified and reported according to enterprise procedures
6. Stack production output
  • 6.1. Output is checked for thorough drying/curing before stacking
  • 6.2. Job status and progress are checked for conformance to job specifications and any necessary action is taken
7. Finish operation
  • 7.1. Excess ink, screens, squeegees and flood coaters are removed and cleaned according to OHS requirements and manufacturer's/supplier's specifications
  • 7.2. Waste materials are disposed of according to manufacturer's/supplier's specifications, regulatory requirements and enterprise procedures
  • 7.3. Equipment and surrounding areas are cleaned according to manufacturer's/supplier's specifications and enterprise procedures
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Drying/curing units may include:
manual drying systems commonly used in specific industry sectors.
Quality standards may include:
should meet client requirements and enterprise and industry standards.
Enterprise procedures may include:
tasks must be performed according to enterprise procedures.
Types of techniques may include:
basic manual techniques relative to industry sector.
Complexity may include:
one- or two-colour jobs.
Degree of autonomy may include:
working under supervision to previously defined procedures to ensure production requirements are met.
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit
Evidence of the following is essential:
manually produce different one- or two-colour print runs according to job specifications
demonstrate an ability to find and use information relevant to the task from a variety of information sources
manually produce TWO different one- or two-colour print runs according to manufacturer's and job specifications, enterprise procedures and the listed Performance Criteria.

Context of and specific resources for assessment
Assessment must ensure:
assessment may take place on the job, off the job or a combination of both of these. Off the job assessment must be undertaken in a closely replicated workplace environment.

Method of assessment
A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:
direct questioning combined with review of portfolios of evidence and third party workplace reports of on-the-job performance by the candidate.

Guidance information for assessment
Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended, for example:
ICPSU202C Prepare, load and unload product on and off machine
ICPSP351C Prepare machine and drying/curing unit.
Replaces
State Code National Code Title Type
D0473 ICPSP271B Manually produce basic screen prints Unit of competency
Replaced By
State Code National Code Title Type
AUP24 ICPSCP271 Manually produce basic screen prints Unit of competency