Unit of competency Outline

Date retreived
22/07/2026 8:34 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove and replace vehicle supplementary restraint systems

Remove and replace vehicle supplementary restraint systems

Unit of competency
National Code
AURVTA002
State Code
AXA11
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030511 - Panel Beating
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to remove and replace vehicle supplementary restraint system (SRS) units and assemblies. It involves preparing for the task, selecting and using specialist tools and equipment to deactivate, remove and replace SRS components, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to remove and replace vehicle SRS
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 SRS removal and replacement specifications are sourced from original equipment manufacturer (OEM) or authorised agency, and are interpreted
  • 1.3 SRS component requiring removal and replacement is identified and selected
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Hand and power tools, including personal protective equipment (PPE), are selected and checked for serviceability
  • 1.6 Work is planned and procedures are determined to minimise waste
2. Deactivate and remove SRS
  • 2.1 SRS is deactivated according to OEM or authorised agency approved methods, workplace procedures and safety requirements
  • 2.2 SRS is removed according to OEM or authorised agency approved methods, workplace procedures and safety requirements, and without causing damage to system or components
  • 2.3 SRS component is tagged and stored according to OEM or authorised agency approved methods and workplace procedures
3. Replace SRS
  • 3.1 SRS component is checked and matched to vehicle
  • 3.2 SRS is replaced according to OEM or authorised agency approved methods, workplace procedures and safety requirements, and without causing damage to system or components
4. Complete work processes
  • 4.1 Final inspection is made to ensure work is to workplace expectations and vehicle is presented ready for use
  • 4.2 Replaced SRS components are disposed of according to OEM or authorised agency approved methods
  • 4.3 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 4.4 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 4.5 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF467 AURVTA3002 Remove and replace supplementary restraint systems Unit of competency