Unit of competency Outline

Date retreived
22/07/2026 11:36 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct bucket-wheel operations

Conduct bucket-wheel operations

Unit of competency
National Code
RIIMPO330D
State Code
WH435
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
4.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
28/05/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
28/05/2014
Nominal Hours
80
Description
This unit describes a participant’s skills and knowledge required to conduct bucket-wheel operations in Coal mining.This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for bucket-wheel operations
  • 1.1 Access, interpret and apply bucket-wheel operations documentation and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Identify and address risks, hazards and environmental issues and implement control measures
  • 1.4 Select and wear personal protective equipment appropriate for work activities
  • 1.5 Access, interpret and apply geological and survey data required to complete the allocated work
  • 1.6 Select, and check for faults, equipment and/or attachments for work activities
  • 1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
2. Operate bucket-wheel excavator
  • 2.1 Coordinate activities with others at the site prior to commencement of, and during, the work activity
  • 2.2 Carry out pre-start, start-up, park-up, shutdown and secure equipment procedures
  • 2.3 Drive and operate bucket-wheel, using controls to remove and place burden
  • 2.4 Steer, travel and maintain alignment, and optimise digging performance
  • 2.5 Act on monitoring systems and alarms or report problems
  • 2.6 Continually monitor hazards and risks, and ensure safety of self, other personnel, plant and equipment
  • 2.7 Complete work plan within the operating capacity of the equipment
3. Relocate bucket-wheel excavator
  • 3.1 Receive and confirm route and location plan and by site inspection
  • 3.2 Complete ground preparation
  • 3.3 Carry out cable location and handling
  • 3.4 Resolve coordination issues, including support equipment and personnel
  • 3.5 Conduct steering and travel to relocate bucket wheel excavator
4. Carry out operator maintenance
  • 4.1 Prepare machine for maintenance
  • 4.2 Conduct inspection and fault finding
  • 4.3 Carry out scheduled maintenance tasks
  • 4.4 Return the machine to service
  • 4.5 Process written maintenance records
5. Conduct housekeeping activities
  • 5.1 Clear work area and dispose of or recycle materials
  • 5.2 Process records
No information
No information
Replaced By
State Code National Code Title Type
OAK45 RIIMPO330E Conduct bucket-wheel operations Unit of competency