Unit of competency Outline

Date retreived
22/07/2026 6:05 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct bucket-wheel operations

Conduct bucket-wheel operations

Unit of competency
National Code
RIIMPO330E
State Code
OAK45
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
11/12/2018
View on TGA
State Implementation and Classification
Approved Date
27/03/2019
Field of Education
030717 - Plant And Machine Operations
Original Release Date
27/03/2019
Nominal Hours
80
Description
This unit describes the skills and knowledge required to operate and excavate using a bucket-wheel excavator.This unit applies to those working in site based roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors, and must be sourced from state jurisdictions prior to applying this unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for bucket-wheel operations
  • 1.1 Access, interpret and apply bucket-wheel operations documentation
  • 1.2 Obtain, interpret, clarify and confirm work requirements
  • 1.3 Identify hazards and environmental issues, assess the risks and implement control measures in line with workplace policies
  • 1.4 Select and wear personal protective equipment required for work activities
  • 1.5 Access, interpret and apply geological and survey data required to complete the work activity
  • 1.6 Select required bucket wheel equipment and confirm suitability for work activities
  • 1.7 Obtain and interpret emergency procedures for bucket wheel excavators, and be prepared for fires, accidents and emergencies
  • 1.8 Coordinate and communicate planned activities with others at the site prior to commencement of work activity
2. Operate bucket-wheel excavator in line with established requirements to complete work activity
  • 2.1 Carry out prestart and start-up checks in line with workplace procedures
  • 2.2 Identify faults or defects and rectify or report within scope of own responsibility and according to workplace procedures
  • 2.3 Drive and operate bucket-wheel to remove and place burden using techniques suited to equipment capabilities, site and work conditions, and according to workplace procedures
  • 2.4 Monitor and manage equipment performance using indicators and alarms in accordance with manufacturers’ specifications
  • 2.5 Monitor hazards and risks during operations, and ensure safety of self, other personnel, plant and equipment
  • 2.6 Park up, shut down, secure and carry out post operational inspection of equipment in line with workplace procedures
3. Relocate bucket-wheel excavator
  • 3.1 Receive and confirm route and location plan and perform site inspection to confirm suitability
  • 3.2 Complete ground preparation
  • 3.3 Carry out cable location and handling in a safe manner
  • 3.4 Coordinate use of support equipment and personnel
  • 3.5 Relocate bucket wheel excavator in line with workplace procedures
4. Conduct housekeeping activities
  • 4.1 Clear work area and dispose of or recycle materials in line with workplace procedures
  • 4.2 Manage and/or report hazards to maintain a safe working environment
  • 4.3 Complete and file or distribute documentation in a manner that complies with workplace practices
No information
No information
Replaces
State Code National Code Title Type
WH435 RIIMPO330D Conduct bucket-wheel operations Unit of competency
State Code National Code Title Type
AZE5 RII30115 Certificate III in Surface Extraction Operations Qualification