Unit of competency Outline

Date retreived
22/07/2026 4:01 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Use timber furnishing construction techniques

Use timber furnishing construction techniques

Unit of competency
National Code
MSFFP2011
State Code
OEJ55
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
08/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030113 - Cabinet Making
Original Release Date
19/04/2023
Nominal Hours
90
Description
This unit describes the skills and knowledge required to follow basic processes for the construction and assembly of a timber product. It includes the use of a limited range of tools, equipment and construction techniques. Learners with his competency have basic skills to support further study or entry-level work in furnishing and furniture making industries. This unit is usually delivered within a pre-employment training program.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1 Identify construction and assembly requirements
  • 1.1 Review drawings and identify tools and equipment required to create item
  • 1.2 Estimate quantities of materials required based on drawings
  • 1.3 Identify key steps in construction and assembly process for individual components and complete item
  • 1.4 Identify quality standards to be achieved
  • 1.5 Identify and follow work health and safety requirements
2 Follow construction and assembly processes
  • 2.1 Confirm that tools and equipment are safe for use prior to starting work
  • 2.2 Operate tools and equipment in accordance with safety requirements and manufacturer specifications
  • 2.3 Lay out and accurately mark and cut materials to meet item specifications
  • 2.4 Join materials in accordance with specifications
  • 2.5 Assemble components using jigs or clamps and fastenings based on item requirements
  • 2.6 Apply adhesives in accordance with workplace procedures and manufacturer instructions
  • 2.7 Confirm item meets quality standards and seek guidance from supervisor to address any deficiencies
3 Clean work area
  • 3.1 Clean and store tools in accordance with procedures
  • 3.2 Safely dispose of waste in accordance with procedures
No information
No information
Replaces
State Code National Code Title Type
WI408 MSFFM1001 Construct a basic timber furnishing product Unit of competency
WI409 MSFFM1002 Operate basic woodworking machines Unit of competency
State Code National Code Title Type
BIJ5 MSF10122 Certificate I in Furnishing Qualification
BIJ8 MSF20522 Certificate II in Furniture Making Pathways Qualification