Unit of competency Outline

Date retreived
23/07/2026 8:01 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Inlay lead to stone

Inlay lead to stone

Unit of competency
National Code
CPCCST3018
State Code
OCP39
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040309 - Bricklaying And Stonemasonry
Original Release Date
01/06/2021
Nominal Hours
16
Description
This unit specifies the skills and knowledge required to inlay lead to letters or shapes carved into stone. This unit applies to stonemasons who work independently or in a team to inlay lead relating to stonemasonry work in a workshop setting, on a new or existing structure. A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without needing close supervision.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industrymeets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare.
  • 1.1 Read, interpret and apply lead inlaying requirements from work instructions, job requirements, standards and codes.
  • 1.2 Follow relevant information from workplace procedures, workplace safety and environmental documentation.
  • 1.3 Determine job priorities and sequence job tasks in consultation with others on site.
  • 1.4 Identify potential hazards and determine and implement control measures.
  • 1.5 Select and check condition of equipment and tools and report damage or faults to relevant person.
2 Perform lead inlay to lettering
  • 2.1 Select, fit correctly and use personal protective equipment (PPE) appropriate for job.
  • 2.2 Prepare base of lettering to key lead.
  • 2.3 Handle and prepare lead safely and work in a well-ventilated area.
  • 2.4 Cut lead strips to suit incised letters or shapes and press into position.
  • 2.5 Beat lead strips into carved letters or shapes without damage to stone face.
  • 2.6 Rasp and rub lead to an even flat or raised finish with clean edges.
  • 2.7 Finish and polish lead inlay using fine abrasive products.
3 Clean up.
  • 3.1 Clear the work area, and dispose of, reuse or recycle materials following workplace and environmental requirements.
  • 3.2 Clean tools and equipment, check for serviceability and report damage or faults.
  • 3.3 Store and secure tools and equipment following workplace procedures.
No information
No information
Replaces
State Code National Code Title Type
WI762 CPCCST3018A Inlay lead to stone Unit of competency
State Code National Code Title Type
BGE7 CPC32320 Certificate III in Stonemasonry Qualification