Unit of competency Outline

Date retreived
22/07/2026 12:58 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove and install large vehicle windscreens

Remove and install large vehicle windscreens

Unit of competency
National Code
AURVTG013
State Code
AWZ96
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
040323 - Glazing
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to remove and install large vehicle windscreens. It involves preparing for the task, selecting and using specialist tools and equipment, removing the damaged windscreen, cutting a replacement windscreen according to original size, applying adhesives according to manufacturer specifications, cleaning and finishing the windscreen, and completing workplace processes and documentation.It applies to those working in the automotive glazing service and repair industry. The windscreens include those of large commercial, mining and agricultural vehicles.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for removal and installation of large vehicle windscreen
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Removal and installation information is accessed and interpreted from windscreen and vehicle manufacturer specifications, workplace procedures, and adhesive safety data sheets (SDS)
  • 1.3 Work is planned to minimise waste and use time efficiently
  • 1.4 Vehicle is inspected to ensure there is no prior damage and that all related accessories are operating correctly
  • 1.5 Glazing materials and windscreen are selected according to windscreen supplier and vehicle manufacturer specifications, and are inspected for quality
  • 1.6 Hazards associated with the work are identified and risks are managed
  • 1.7 Tools and equipment are selected and checked for serviceability
  • 1.8 Vehicle is protected and safely located according to workplace procedures
2. Remove large vehicle windscreen
  • 2.1 Windscreen is removed according to manufacturer specifications, safety and environmental requirements, and without causing damage to vehicle or components
  • 2.2 Tools and equipment for windscreen removal and support are used correctly
  • 2.3 Equipment required to work safely at heights is used according to manufacturer specifications and workplace procedures
3. Cut and install large vehicle windscreen
  • 3.1 New windscreen is cut, installed, bonded or sealed, and finished according to manufacturer specifications, and safety and environmental requirements
  • 3.2 Adhesive is cured according to adhesive manufacturer specifications and timeframes, as required
  • 3.3 Installation of windscreen is completed according to workplace procedures and safety requirements, and within accepted workplace timeframes
4. Complete work processes
  • 4.1 Final inspection is made to ensure work meets workplace expectations, related accessories are operating correctly, and vehicle is presented ready for use
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF482 AURVTG3013 Remove and install large vehicle windscreens Unit of competency
Replaced By
State Code National Code Title Type
OCL36 AURVTG113 Remove and install large vehicle windscreens Unit of competency
State Code National Code Title Type
BAF7 AUR32216 Certificate III in Automotive Glazing Technology Qualification