Unit of competency Outline

Date retreived
22/07/2026 6:48 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate resin-glass depositor equipment

Operate resin-glass depositor equipment

Unit of competency
National Code
PMBPROD280
State Code
BAI99
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
22/06/2016
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
05/08/2016
Nominal Hours
30
Description
This unit of competency covers the skills and knowledge required to operate automated resin-glass depositor (chopper gun) equipment for composite products. This unit of competency applies to operators who are required to check the requirements for the job; perform pre-operational checks; monitor equipment operations, moulds, product quality and conformity; and recognise routine and non-routine problems and take appropriate action.This unit of competency applies to an individual working alone or as part of a team or group and working in liaison with other shift team members, team leader and supervisor, as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Check work requirements
  • 1.1 Identify work requirements from production plan or request
  • 1.2 Check product, materials and equipment requirements for job
  • 1.3 Recognise requirements which may not be in accordance with usual practice
  • 1.4 Ask questions of appropriate person to confirm non-standard job specifications
  • 1.5 Ensure housekeeping is to requirements
  • 1.6 Identify hazards associated with the job and take appropriate action
  • 1.7 Perform other pre-operational checks in accordance with workplace procedures
2 Check process set-up
  • 2.1 Check safety equipment and guards are in position and working
  • 2.2 Check operation of resin-glass depositor equipment
  • 2.3 Check moulds for cracks, chips, marks and cleanliness
  • 2.4 Check materials, including fibre preforms, resins, additives and release agents are correct
  • 2.5 Complete pre-start checks
3 Operate equipment to procedures
  • 3.1 Start equipment safely and correctly when required
  • 3.2 Check process is operating within required limits
  • 3.3 Collect products and store as required
  • 3.4 Check product/process is in specification/to required quality standard
  • 3.5 Maintain supply of materials as required
  • 3.6 Complete logs and records as required
  • 3.7 Collect and segregate scrap, waste and other materials as required
  • 3.8 Keep equipment and work area clean
  • 3.9 Pause equipment cycle and perform emergency stop, as required
4 Respond to routine problems in accordance with procedures
  • 4.1 Recognise known faults that occur during the operation
  • 4.2 Identify and take action on causes of routine faults
  • 4.3 Log problems as required
  • 4.4 Identify non-routine process and quality problems and take appropriate action
No information
No information
Replaces
State Code National Code Title Type
W7597 PMBPROD280B Operate resin-glass depositor equipment Unit of competency
Replaced By
State Code National Code Title Type
ODB56 PMBPROD280E Operate a chopper gun to lay-up composites Unit of competency