Unit of competency Outline

Date retreived
22/07/2026 8:34 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Complete a basic upholstery project

Complete a basic upholstery project

Unit of competency
National Code
MSFUP1001
State Code
WI660
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030115 - Furniture Upholstery And Renovation
Original Release Date
19/06/2014
Nominal Hours
80
Description
This unit of competency covers preparing, fitting and finishing a basic upholstery product.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for work
  • 1.1 Work instructions are used to determine job requirements, including design variations, tolerances, process, materials, finish and quantity
  • 1.2 Work sequence is planned
  • 1.3 Procedures are determined for checking quality at each stage of the process
  • 1.4 Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
  • 1.5 Suitable work area is selected for the task
  • 1.6 Preparatory drawings/templates for tasks are confirmed
  • 1.7 Materials are selected following work instructions
  • 1.8 Tools and equipment suitable for the work are selected and checked for safe and effective operation
2 Fit and finish product
  • 2.1 Material is prepared and set out according to work instructions and components are marked according to workplace procedures
  • 2.2 Tools and equipment are used in accordance with safety requirements and manufacturer specifications
  • 2.3 Components are prepared, including any specified shapes, angles or curves, and checked against set-out and job requirements
  • 2.4 Components are fitted to job requirements
  • 2.5 Assembly process is undertaken according to workplace procedures
  • 2.6 Product is checked for compliance with specifications
  • 2.7 Product is finished in accordance with work instructions
3 Finalise operation and maintain equipment
  • 3.1 Work area is cleaned and hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures
  • 3.2 Unused materials are collected and stored for re-use
  • 3.3 Waste and scrap materials are disposed of/recycled following workplace procedures
No information
No information
Replaces
State Code National Code Title Type
W8804 LMFUP1001B Complete a basic upholstery project Unit of competency
Replaced By
State Code National Code Title Type
OEJ84 MSFFP2015 Use basic upholstery techniques Unit of competency
State Code National Code Title Type
J724 MSF10113 Certificate I in Furnishing Qualification