Unit of competency Outline

Date retreived
22/07/2026 9:29 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform complex metal spinning lathe operations

Perform complex metal spinning lathe operations

Unit of competency
National Code
MEM07031
State Code
OAW24
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
26/06/2019
View on TGA
State Implementation and Classification
Approved Date
Field of Education
030707 - Metal Fitting, Turning And MacHining
Original Release Date
Nominal Hours
36
Description
This unit of competency defines the skills and knowledge required to perform complex metal spinning operations (excluding computer numerically controlled [CNC]) operations, using advanced processes, spinning tools and accessories.Where there is a requirement to join spun materials or products in addition to, or instead of, (the spinning operation of) swaging, the following units should also be selected as appropriate:MEM05003 Perform soft solderingMEM05006 Perform brazing and/or silver soldering; or MEM05004 Perform routine oxy fuel gas welding; orMEM05012 Perform routine manual metal arc weldingNo licensing, legislative or certification requirements apply to this unit at the time of publication. Band: AUnit Weight: 4
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Prepare form chucks for spinning
  • 2.1 Select tools to produce components to specifications
  • 2.2 Determine disc and cut to the correct size and tolerance in accordance with procedures
  • 2.3 Set up metal turning lathe for machining form chucks according to standards and SOPs
  • 2.4 Prepare form chuck for general spinning as per drawings and specifications
  • 2.5 Prepare form chuck for seaming/swaging joints as per drawings and specifications
3 Perform complex spinning operations
  • 3.1 Calculate spinning speeds for various metals and metal thicknesses using appropriate mathematical techniques and reference materials
  • 3.2 Select correct back centre and form chucks and mount according to procedures and specifications
  • 3.3 Mount prepared disc for forming
  • 3.4 Perform complex spinning operations using accessories required to achieve the specified outcome
4 Check components for conformance to specifications
  • 4.1 Check spun components for conformance to specifications using appropriate techniques, tools and equipment
  • 4.2 Rectify non-compliant spun components in accordance with SOPs
5 Remove and store components
  • 5.1 Remove components from the spinning lathe without marking or any deformation
  • 5.2 Store components and package to avoid oxidation and damage
No information
No information
Replaces
State Code National Code Title Type
W5377 MEM07031C Perform metal spinning lathe operations (complex) Unit of competency