Unit of competency Outline
Date retreived
23/07/2026 3:33 AM AWST
23/07/2026 3:33 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Operate basic flow control and regulating devices in irrigation systems
Operate basic flow control and regulating devices in irrigation systems
Unit of competency
National Code
NWPIRR002
NWPIRR002
State Code
AVZ10
AVZ10
TGA Status
Replaced
Replaced
DTWD Status
Transition (Replaced)
Transition (Replaced)
State Implementation and Classification
Approved Date
15/04/2016
Field of Education
030907 - Water And Sanitary Engineering
Original Release Date
15/04/2016
Nominal Hours
20
Description
This unit describes the skills required to operate basic flow control and regulating devices in irrigation systems.This unit applies to those working as field and operational staff with responsibility for using flow control and metering devices according to organisational procedures.The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to. Those undertaking this unit would work independently or in a team, under direct supervision using own familiar resources as required, while performing routine tasks in range of familiar contexts.No licensing, legislative or certification requirements apply to unit at the time of publication.
Notes
Elements and Performance Criteria
1. Monitor and regulate required flows in irrigation systems
- 1.1 Access and apply operating requirements for flows in irrigation systems.
- 1.2 Use equipment to assist operational activities.
- 1.3 Monitor, measure and record flows at designated locations and systems according to schedule.
- 1.4 Identify potential operational problems and provide proactive advice.
- 1.5 Adjust flow regulation and control mechanisms to increase and decrease flow.
2. Record and report system adjustments
- 2.1 Produce information relating to flow adjustments.
- 2.2 Collect, record and report information on flows and abnormalities.
3. Respond to contingencies
- 3.1 Identify and assess potential risks and contingencies in the operation of flow control and regulating devices.
- 3.2 Respond to potential and actual risks and contingencies.
- 3.3 Inform relevant personnel within organisation of potential risks.
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| D1846 | NWP222A | Operate basic flow control and regulating devices in irrigation systems | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OBO09 | NWPIWS002 | Operate regulating devices in rural irrigation systems | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BEY3 | AHC21119 | Certificate II in Irrigation | Qualification |
| BDD5 | AHC21116 | Certificate II in Irrigation | Qualification |
| BEZ2 | AHC32419 | Certificate III in Irrigation Technology | Qualification |
| AYW4 | NWP20115 | Certificate II in Water Industry Operations | Qualification |