Unit of competency Outline
Date retreived
22/07/2026 1:08 PM AWST
22/07/2026 1:08 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Manage the preparation of a competition vehicle
Manage the preparation of a competition vehicle
Unit of competency
National Code
AURMMA4002
AURMMA4002
State Code
WF268
WF268
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
08/07/2013
Field of Education
080315 - Project Management
Original Release Date
08/07/2013
Nominal Hours
40
Description
This unit of competency describes the skills and knowledge required to develop competition vehicle preparation specifications, checklists and schedules, and to supervise the preparation and post-preparation checks to the competition vehicle.It requires the ability to research for information, assess personnel capabilities, schedule constraints, and supervise others to prepare a competition vehicle and to check the post-preparation vehicle and work area.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Research information to develop preparation specifications and checklists
- 1.1. Use controlling body rules, category rules, supplementary regulations and team requirements to specify task requirements, including configuration, equipment, quality and quantities
- 1.2. Examine regulations and specifications/tolerances for competitive advantage
- 1.3. Observe workplace health and safety (WHS) requirements, including regulatory requirements, equipment and system isolation requirements, and personal protection needs, throughout the work
- 1.4. Write job specifications containing steps and stages and communicate to appropriate persons
- 1.5. Produce preparation checklists
- 1.6. Develop procedures for minimising waste material
2. Develop preparation schedule
- 2.1. Assess equipment and appropriate person capabilities to meet job specifications
- 2.2. Consider constraints to schedule, including timing and location of upcoming event, and equipment/component and appropriate personnel availability
- 2.3. Document optimum sequence for preparation
- 2.4. Document critical path and factors affecting that path
- 2.5. Produce and communicate preparation schedule to appropriate persons
3. Supervise preparation
- 3.1. Monitor implementation of preparation schedule
- 3.2. Monitor work area cleanliness and layout for job requirements
- 3.3. Install and supervise inspections for quality and readiness of components for installation
- 3.4. Supervise installation sequence and techniques
- 3.5. Conduct checks during and after installation to ensure accurate and complete fitting
- 3.6. Evaluate and resolve problems with the work area or the operation of equipment
- 3.7. Evaluate and resolve problems with proposals for modifications or adaptation of equipment and components
4. Supervise post-preparation checks
- 4.1. Inspect vehicle and identify and address problems
- 4.2. Supervise post-preparation checks and vehicle start-up
- 4.3. Supervise vehicle baseline set-up
- 4.4. Supervise clean-up of work area
- 4.5. Inspect work area and vehicle completion and complete documentation
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Competitive advantage
Competitive advantage may include:
technical advantage
psychological advantage
promotional advantage
Preparation checklists
Preparation checklists may include:
assembly checklists
worksheets
pre-race/event checklists
pit lane checklists
post-race/event checklists
Tooling and equipment
Tooling and equipment may include:
hand tooling
measuring devices
computers
WHS requirements
WHS requirements are to be in accordance with applicable commonwealth, state or territory legislation and regulations, and organisational safety policies and procedures, and may include:
personal protective equipment and clothing
safety equipment
first aid equipment
hazard and risk control
elimination of hazardous materials and substances
manual handling, including shifting, lifting and carrying
emergency procedures
team insurance requirements
material safety management systems
controlling body requirements
manufacturer/component supplier specifications
local safe operating procedures
Legislative requirements
Legislative requirements are to be in accordance with applicable commonwealth, state or territory legislation, regulations, certification requirements and codes of practice, and may include:
award and enterprise agreements
industrial relations
Australian standards
Australian Design Rules
confidentiality and privacy
WHS
the environment
equal opportunity
anti-discrimination
duty of care
health regulations
Information and procedures
Information and procedures may include:
controlling body rules, category rules and supplementary regulations
event scheduling and location details
team procedures and standards related to:
the preparation of competition vehicles
reporting and communication
use of tooling and equipment
emergency service contacts and team personnel emergency contacts
team emergency and event procedures for accidents or injury
work instructions, including worksheets, material safety data sheets (MSDS), assembly procedures, plans, drawings, designs and checklists
manufacturer/component supplier specifications and application procedures for test equipment and material
Australian Design Rules (where applicable)
safety body publications
environmental, hazardous chemicals and dangerous goods legislation and local requirements relating to the disposal and use of fuels, lubricants, coolants and cleaning agents
motorsport/performance enhancement industry publications and electronic sources of information related to the preparation of competition vehicles
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Competitive advantage
Competitive advantage may include:
technical advantage
psychological advantage
promotional advantage
Preparation checklists
Preparation checklists may include:
assembly checklists
worksheets
pre-race/event checklists
pit lane checklists
post-race/event checklists
Tooling and equipment
Tooling and equipment may include:
hand tooling
measuring devices
computers
WHS requirements
WHS requirements are to be in accordance with applicable commonwealth, state or territory legislation and regulations, and organisational safety policies and procedures, and may include:
personal protective equipment and clothing
safety equipment
first aid equipment
hazard and risk control
elimination of hazardous materials and substances
manual handling, including shifting, lifting and carrying
emergency procedures
team insurance requirements
material safety management systems
controlling body requirements
manufacturer/component supplier specifications
local safe operating procedures
Legislative requirements
Legislative requirements are to be in accordance with applicable commonwealth, state or territory legislation, regulations, certification requirements and codes of practice, and may include:
award and enterprise agreements
industrial relations
Australian standards
Australian Design Rules
confidentiality and privacy
WHS
the environment
equal opportunity
anti-discrimination
duty of care
health regulations
Information and procedures
Information and procedures may include:
controlling body rules, category rules and supplementary regulations
event scheduling and location details
team procedures and standards related to:
the preparation of competition vehicles
reporting and communication
use of tooling and equipment
emergency service contacts and team personnel emergency contacts
team emergency and event procedures for accidents or injury
work instructions, including worksheets, material safety data sheets (MSDS), assembly procedures, plans, drawings, designs and checklists
manufacturer/component supplier specifications and application procedures for test equipment and material
Australian Design Rules (where applicable)
safety body publications
environmental, hazardous chemicals and dangerous goods legislation and local requirements relating to the disposal and use of fuels, lubricants, coolants and cleaning agents
motorsport/performance enhancement industry publications and electronic sources of information related to the preparation of competition vehicles
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently:
interpret and apply team requirements, controlling body and category rules and supplementary regulations
correctly apply and use safety equipment and personal protective equipment
follow task instructions, operating procedures and inspection processes to:
minimise the risk of injury to self or others
prevent damage to competition vehicle or equipment
achieve required outcomes within team time and quality standards
correctly manage the preparation of a competition vehicle on at least one (1) occasion, covering each of the following:
develop task specifications, preparation checklists and schedules
supervise competition vehicle preparation and post-preparation checks
work effectively with others
modify activities to cater for variations in workplace context and environment.
Context of, and specific resources for assessment
The application of competency is to be assessed in the workplace or a simulated environment that reflects as far as possible the actual working environment.
Assessment is to occur using standard and authorised work practices, safety requirements and environmental constraints.
Assessment is to comply with relevant regulatory requirements, including specified Australian standards.
Where applicable, reasonable adjustment must be made to work environments and training situations to accommodate ethnicity, age, gender, demographics and disability.
The following resources should be made available:
access to competition vehicles
assembly tooling
computing, operational and inventory support systems
material, equipment and information on work specifications
team requirements
organisational procedures
safety procedures and regulations
quality standards.
Method of assessment
Assessment must satisfy the endorsed Assessment Guidelines of this Training Package.
Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of Required Skills and Knowledge.
Assessment methods must be by direct observation of tasks and include questioning on Required Skills and Knowledge to ensure its correct interpretation and application.
Assessment may be applied under project-related conditions (real or simulated) and require evidence of process.
Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances.
Competence in this unit may be assessed in conjunction with other functional units which together form part of the holistic work role.
Guidance information for assessment
Assessment processes and techniques must be culturally sensitive and appropriate to the language and literacy capacity of the candidate and the work being performed.
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently:
interpret and apply team requirements, controlling body and category rules and supplementary regulations
correctly apply and use safety equipment and personal protective equipment
follow task instructions, operating procedures and inspection processes to:
minimise the risk of injury to self or others
prevent damage to competition vehicle or equipment
achieve required outcomes within team time and quality standards
correctly manage the preparation of a competition vehicle on at least one (1) occasion, covering each of the following:
develop task specifications, preparation checklists and schedules
supervise competition vehicle preparation and post-preparation checks
work effectively with others
modify activities to cater for variations in workplace context and environment.
Context of, and specific resources for assessment
The application of competency is to be assessed in the workplace or a simulated environment that reflects as far as possible the actual working environment.
Assessment is to occur using standard and authorised work practices, safety requirements and environmental constraints.
Assessment is to comply with relevant regulatory requirements, including specified Australian standards.
Where applicable, reasonable adjustment must be made to work environments and training situations to accommodate ethnicity, age, gender, demographics and disability.
The following resources should be made available:
access to competition vehicles
assembly tooling
computing, operational and inventory support systems
material, equipment and information on work specifications
team requirements
organisational procedures
safety procedures and regulations
quality standards.
Method of assessment
Assessment must satisfy the endorsed Assessment Guidelines of this Training Package.
Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of Required Skills and Knowledge.
Assessment methods must be by direct observation of tasks and include questioning on Required Skills and Knowledge to ensure its correct interpretation and application.
Assessment may be applied under project-related conditions (real or simulated) and require evidence of process.
Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances.
Competence in this unit may be assessed in conjunction with other functional units which together form part of the holistic work role.
Guidance information for assessment
Assessment processes and techniques must be culturally sensitive and appropriate to the language and literacy capacity of the candidate and the work being performed.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| D7614 | AURM441638B | Manage the preparation of a competition vehicle | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AXC10 | AURMMA002 | Manage the preparation of motor sport competition vehicles | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| J416 | AUR40312 | Certificate IV in Motorsport Technology | Qualification |
| J397 | AUR30912 | Certificate III in Motorsport Technology | Qualification |