Unit of competency Outline

Date retreived
22/07/2026 5:34 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Manage the preparation of a competition vehicle

Manage the preparation of a competition vehicle

Unit of competency
National Code
AURM441638B
State Code
D7614
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
21/06/2011
View on TGA
State Implementation and Classification
Approved Date
26/09/2011
Field of Education
080315 - Project Management
Original Release Date
26/09/2011
Nominal Hours
40
Description
This unit of competency describes the skills and knowledge required to develop competition vehicle preparation specifications, checklists and schedules, and to supervise the preparation and post-preparation checks to the competition vehicle.It requires the ability to research for information, assess personnel capabilities, schedule constraints, and supervise others to prepare a competition vehicle and to check the post-preparation vehicle and work area.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Research information to develop preparation specifications and checklists
  • 1.1. Use controlling body rules, category rules, supplementary regulations and team requirements to specify task requirements, including configuration, equipment, quality and quantities
  • 1.2. Examine regulations and specifications/tolerances for competitive advantage
  • 1.3. Observe occupational health and safety (OHS) requirements, including regulatory requirements, equipment and system isolation requirements, and personal protection needs, throughout the work
  • 1.4. Write job specifications containing steps and stages and communicate to appropriate persons
  • 1.5. Produce preparation checklists
  • 1.6. Develop procedures for minimising waste material
2. Develop preparation schedule
  • 2.1. Assess equipment and appropriate person capabilities to meet job specifications
  • 2.2. Consider constraints to schedule, including timing and location of upcoming event, and equipment/component and appropriate personnel availability
  • 2.3. Document optimum sequence for preparation
  • 2.4. Document critical path and factors affecting that path
  • 2.5. Produce and communicate preparation schedule to appropriate persons
3. Supervise preparation
  • 3.1. Monitor implementation of preparation schedule
  • 3.2. Monitor work area cleanliness and layout for job requirements
  • 3.3. Install and supervise inspections for quality and readiness of components for installation
  • 3.4. Supervise installation sequence and techniques
  • 3.5. Conduct checks during and after installation to ensure accurate and complete fitting
  • 3.6. Evaluate and resolve problems with the work area or the operation of equipment
  • 3.7. Evaluate and resolve problems with proposals for modifications or adaptation of equipment and components
4. Supervise post-preparation checks
  • 4.1. Inspect vehicle and identify and address problems
  • 4.2. Supervise post-preparation checks and vehicle start-up
  • 4.3. Supervise vehicle baseline set-up
  • 4.4. Supervise clean-up of work area
  • 4.5. Inspect work area and vehicle completion and complete documentation
No information
No information
Replaces
State Code National Code Title Type
W2902 AURM441638A Manage the preparation of a competition vehicle Unit of competency
Replaced By
State Code National Code Title Type
WF268 AURMMA4002 Manage the preparation of a competition vehicle Unit of competency
No information