Unit of competency Outline
Date retreived
24/07/2026 7:34 AM AWST
24/07/2026 7:34 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Support plant operations
Support plant operations
Unit of competency
National Code
RIICCM206A
RIICCM206A
State Code
WB070
WB070
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
03/09/2012
Field of Education
030901 - Construction Engineering
Original Release Date
03/09/2012
Nominal Hours
8
Description
This unit covers the support of plant operations in the civil construction industry. It includes planning and preparing, identifying and protecting services, supporting the operators, and cleaning up. Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare
- 1.1. Access, interpret and apply compliance documentation relevant to the work activity
- 1.2. Obtain and confirm safety requirements from the site safety plan and organisational policies and procedures, and apply to the allotted task
- 1.3. Identify, obtain and implement signage requirements from the project traffic management plan
- 1.4. Select plant, tools and equipment to carry out tasks consistent with the requirements of the job, check for serviceability and rectify or report any faults
- 1.5. Identify environmental protection requirements from the project environmental management plan, and confirm and apply to the allotted task
2. Identify and protect services
- 2.1. Locate services from plan
- 2.2. Locate service markers during machine operations and advise operators of location to prevent damage
- 2.3. Expose and mark services, and erect barriers to prevent damage
3. Support the operators
- 3.1. Notify operator of unsafe conditions or potential damage to property
- 3.2. Check pegs and levels and give advice to machine operator for compliance with job requirements
- 3.3. Deliver or relocate materials to correct location and check them for quality and quantity
- 3.4. Direct delivery plant/trucks to required location for loading/unloading
- 3.5. Provide guidance to assist machine operator with spreading of materials to specified levels
- 3.6. Provide guidance to assist machine operator with compaction of materials in layers
- 3.7. Finish excavation jobs by hand to specifications
- 3.8. Report damage to access roads to supervisor
4. Clean up
- 4.1. Clear work area and dispose of or recycle materials in accordance with project environmental management plan
- 4.2. Clean, check, maintain and store tools and equipment
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Relevant compliance documentation may include:
legislative, organisational and site requirements and procedures
manufacturer's guidelines and specifications
Australian standards
Employment and workplace relations legislation
Equal Employment Opportunity and Disability Discrimination legislation
Safety requirements may include:
OHS requirements in accordance with state or territory legislation and regulations, organisational safety policies and procedures, and project safety plan including: protective clothing and equipment, use of tools and equipment, workplace environment and safety, handling of materials, use of fire fighting equipment, use of First Aid equipment, hazard control and hazardous materials and substances
safe operating procedures including recognising and preventing hazards associated with high voltage power lines, uneven/unstable terrain, trees, overhead service lines, bridges, surrounding buildings, obstructions, structures, facilities, dangerous materials, recently filled trenches, other machines, personnel, traffic control, working at heights, working in proximity to others, worksite visitors and the public
safe parking practices including ensuring access ways are clear, equipment/machinery is away from overhangs and refuelling sites, safe distance from excavations, and secured from unauthorised access or movement
recognising hazards and risks including uneven/unstable terrain, trees, fires, overhead and underground services, bridges, buildings, excavations, traffic, embankments, cuttings, structures and hazardous materials
emergency procedures related to equipment operation including emergency shutdown and stopping, extinguishing equipment fires, organisational First Aid requirements and evacuation
Tools and equipment may include:
tape measure
string line
plumb bob
batter boards
levelling devices/instruments
two way radio
barriers/barricades
Environmental protection requirements may include:
organisational/project environmental management plan
waste management
water quality protection
noise
vibration
dust and clean-up management
Materials may include:
clays
silts
stone
gravel
mud
rock
metamorphic
igneous
sedimentary
sand
topsoil
bituminous mixes
Plant may include:
trucks
dozers
graders
scrapers
tractors
excavators
front end loaders
rollers
water carts
pavers
Relevant compliance documentation may include:
legislative, organisational and site requirements and procedures
manufacturer's guidelines and specifications
Australian standards
Employment and workplace relations legislation
Equal Employment Opportunity and Disability Discrimination legislation
Safety requirements may include:
OHS requirements in accordance with state or territory legislation and regulations, organisational safety policies and procedures, and project safety plan including: protective clothing and equipment, use of tools and equipment, workplace environment and safety, handling of materials, use of fire fighting equipment, use of First Aid equipment, hazard control and hazardous materials and substances
safe operating procedures including recognising and preventing hazards associated with high voltage power lines, uneven/unstable terrain, trees, overhead service lines, bridges, surrounding buildings, obstructions, structures, facilities, dangerous materials, recently filled trenches, other machines, personnel, traffic control, working at heights, working in proximity to others, worksite visitors and the public
safe parking practices including ensuring access ways are clear, equipment/machinery is away from overhangs and refuelling sites, safe distance from excavations, and secured from unauthorised access or movement
recognising hazards and risks including uneven/unstable terrain, trees, fires, overhead and underground services, bridges, buildings, excavations, traffic, embankments, cuttings, structures and hazardous materials
emergency procedures related to equipment operation including emergency shutdown and stopping, extinguishing equipment fires, organisational First Aid requirements and evacuation
Tools and equipment may include:
tape measure
string line
plumb bob
batter boards
levelling devices/instruments
two way radio
barriers/barricades
Environmental protection requirements may include:
organisational/project environmental management plan
waste management
water quality protection
noise
vibration
dust and clean-up management
Materials may include:
clays
silts
stone
gravel
mud
rock
metamorphic
igneous
sedimentary
sand
topsoil
bituminous mixes
Plant may include:
trucks
dozers
graders
scrapers
tractors
excavators
front end loaders
rollers
water carts
pavers
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to worksite operations and satisfy all of the requirements of the performance criteria, required skills and knowledge and the range statement of this unit and include evidence of the following:
knowledge of the requirements, procedures and instructions for support plant operations
implementation of requirements, procedures and techniques for the safe, effective and efficient completion of plant operations support
working with others to undertake and complete the plant operations support in a way that meets all of the required outcomes
consistent timely completion of plant operations support that safely, effectively and efficiently meets the required outcomes
the completion of four standard shifts requiring the spotting for a minimum of two separate activities involving excavation, fill, spreading of imported material and trimming
Context of and specific resources for assessment
This unit must be assessed in the context of the work environment. Where personal safety or environmental damage are limiting factors, assessment may occur in a simulated environment provided it is realistic and sufficiently rigorous to cover all aspects of workplace performance, including task skills, task management skills, contingency management skills and job role environment skills.
Assessment of this competency requires typical resources normally used in a resources and infrastructure sector environment. Selection and use of resources for particular worksites may differ due to the site circumstances.
The assessment environment should not disadvantage the participant. For example, language, literacy and numeracy demands of assessment should not be greater than those required on the job.
Customisation of assessment and delivery environment to sensitively accommodate cultural diversity.
Aboriginal people and other people from a non English speaking background may have second language issues.
Where applicable, physical resources should include equipment modified for people with disabilities. Access must be provided to appropriate learning and/or assessment support when required.
Method of assessment
This unit may be assessed in a holistic way with other units of competency. The assessment strategy for this unit must verify required knowledge and skill and practical application using more than one of the following assessment methods:
written and/or oral assessment of the candidate's required knowledge
observed, documented and/or first hand testimonial evidence of the candidate's:
implementation of appropriate requirement, procedures and techniques for the safe, effective and efficient achievement of required outcomes
consistent achievement of required outcomes
first hand testimonial evidence of the candidate's:
working with others to undertake and complete the plant operations support
Guidance information for assessment
Consult the SkillsDMC User Guide for further information on assessment including access and equity issues.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to worksite operations and satisfy all of the requirements of the performance criteria, required skills and knowledge and the range statement of this unit and include evidence of the following:
knowledge of the requirements, procedures and instructions for support plant operations
implementation of requirements, procedures and techniques for the safe, effective and efficient completion of plant operations support
working with others to undertake and complete the plant operations support in a way that meets all of the required outcomes
consistent timely completion of plant operations support that safely, effectively and efficiently meets the required outcomes
the completion of four standard shifts requiring the spotting for a minimum of two separate activities involving excavation, fill, spreading of imported material and trimming
Context of and specific resources for assessment
This unit must be assessed in the context of the work environment. Where personal safety or environmental damage are limiting factors, assessment may occur in a simulated environment provided it is realistic and sufficiently rigorous to cover all aspects of workplace performance, including task skills, task management skills, contingency management skills and job role environment skills.
Assessment of this competency requires typical resources normally used in a resources and infrastructure sector environment. Selection and use of resources for particular worksites may differ due to the site circumstances.
The assessment environment should not disadvantage the participant. For example, language, literacy and numeracy demands of assessment should not be greater than those required on the job.
Customisation of assessment and delivery environment to sensitively accommodate cultural diversity.
Aboriginal people and other people from a non English speaking background may have second language issues.
Where applicable, physical resources should include equipment modified for people with disabilities. Access must be provided to appropriate learning and/or assessment support when required.
Method of assessment
This unit may be assessed in a holistic way with other units of competency. The assessment strategy for this unit must verify required knowledge and skill and practical application using more than one of the following assessment methods:
written and/or oral assessment of the candidate's required knowledge
observed, documented and/or first hand testimonial evidence of the candidate's:
implementation of appropriate requirement, procedures and techniques for the safe, effective and efficient achievement of required outcomes
consistent achievement of required outcomes
first hand testimonial evidence of the candidate's:
working with others to undertake and complete the plant operations support
Guidance information for assessment
Consult the SkillsDMC User Guide for further information on assessment including access and equity issues.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W2070 | BCCCM2006B | Support plant operations | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WH082 | RIICCM206D | Support plant operations | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W661 | RII20809 | Certificate II in Bituminous Surfacing | Qualification |
| W675 | RII31109 | Certificate III in Bridge Construction and Maintenance | Qualification |
| D793 | RII20712 | Certificate II in Civil Construction | Qualification |
| W673 | RII30909 | Certificate III in Civil Construction | Qualification |
| W672 | RII30809 | Certificate III in Civil Construction Plant Operations | Qualification |
| W677 | RII31309 | Certificate III in Pipe Laying | Qualification |
| W678 | RII31409 | Certificate III in Road Construction and Maintenance | Qualification |
| W679 | RII31509 | Certificate III in Road Marking | Qualification |
| W680 | RII31609 | Certificate III in Trenchless Technology | Qualification |
| W681 | RII31709 | Certificate III in Tunnel Construction | Qualification |