Unit of competency Outline

Date retreived
23/07/2026 5:57 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Maintain properties and structures

Maintain properties and structures

Unit of competency
National Code
AHCINF207
State Code
OFB20
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
24/01/2023
View on TGA
State Implementation and Classification
Approved Date
09/06/2023
Field of Education
040399 - Building, N.e.c.
Original Release Date
09/06/2023
Nominal Hours
30
Description
This unit of competency describes the skills and knowledge required to maintain and repair properties and structures where the services of a tradesperson is not necessary.The unit applies to individuals who maintain properties and structures under general supervision with limited autonomy or accountability.All work must be carried out to comply with workplace procedures, health and safety in the workplace requirements, legislative and regulatory requirements.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Identify and confirm maintenance requirements
  • 1.1 Confirm work instructions with supervisor
  • 1.2 Identify and report workplace health and safety hazards and risks to supervisor
  • 1.3 Inspect structures and facilities to locate and report defects and deterioration
  • 1.4 Check property infrastructure and resources for correct operation, minor maintenance needs and damage
  • 1.5 Confirm maintenance plan with supervisor
2. Select and prepare tools, equipment and materials
  • 2.1 Prepare and use tools, equipment and materials according to supervisor instructions
  • 2.2 Carry out routine pre-operational checks on tools
  • 2.3 Identify faulty or unsafe tools, and separate for repair or replacement
  • 2.4 Select, fit and use personal protective equipment (PPE) applicable to the task
3. Carry out routine maintenance
  • 3.1 Perform routine maintenance to infrastructure, structures and facilities
  • 3.2 Carry out minor repairs according to supervisor instructions
4. Complete maintenance activities
  • 4.1 Clear and tidy work area, and remove and dispose of or recycle rubbish and waste material
  • 4.2 Clean, maintain and store tools, materials and equipment
  • 4.3 Report work outcomes and malfunctions, faults, wear or damage of tools to supervisor
No information
No information
Replaces
State Code National Code Title Type
BAR98 AHCINF203 Maintain properties and structures Unit of competency