Unit of competency Outline

Date retreived
23/07/2026 4:55 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up machine for basic folding

Set up machine for basic folding

Unit of competency
National Code
ICPCBF2410
State Code
OBP35
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
06/05/2020
View on TGA
State Implementation and Classification
Approved Date
20/08/2020
Field of Education
030717 - Plant And Machine Operations
Original Release Date
20/08/2020
Nominal Hours
30
Description
This unit describes the skills and knowledge required to set up a machine for basic folding.It applies to individuals who work under direct supervision, who are responsible for operating and monitoring equipment and machinery.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for job
  • 1.1 Identify job specifications
  • 1.2 Carry out set-up of required machinery according to manufacturer specifications
  • 1.3 Confirm availability of all job related components
  • 1.4 Set up and adjust delivery systems according to job specifications
2. Set up machine for basic folding
  • 2.1 Set up and adjust folding units according to job specifications
  • 2.2 Set up and adjust required folding rollers, belts and rails
3. Set up in-line units for basic processes
  • 3.1 Set up and adjust minor in-line units for basic processes according to machine requirements
  • 3.2 Provide assistance in setting up major in-line units
4. Conduct sample run
  • 4.1 Set up and operate machine to produce a sample according to work health and safety requirements, manufacturer specifications and enterprise procedures
  • 4.2 Inspect and test sample as required according to enterprise procedures
  • 4.4 Interpret results to determine adjustment requirements
  • 4.5 Carry out adjustments according to product and machine specifications
No information
No information
Replaces
State Code National Code Title Type
AUM58 ICPCBF241 Set up machine for basic single or continuous folding Unit of competency