Unit of competency Outline
Date retreived
22/07/2026 1:07 PM AWST
22/07/2026 1:07 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Carry out final inspection of articles
Carry out final inspection of articles
Unit of competency
National Code
LMTDC2008A
LMTDC2008A
State Code
W7192
W7192
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
01/11/2010
Field of Education
039909 - Cleaning
Original Release Date
01/11/2010
Nominal Hours
60
Description
This unit covers the skills and knowledge required for final checking and inspection of articles to ensure customer requirements and quality has been met.
Notes
Elements and Performance Criteria
1 Inspect articles for quality outcomes
- 1.1 Articles are inspected against quality and workplace standards
- 1.2 Minor problems, such as lint removal, are rectified
- 1.3 Articles not meeting quality standards are returned for spotting, repressing or repair
- 1.4 Articles requiring minor repair are rectified, reported or otherwise attended to
- 1.5 Workplace procedures and instructions are read and interpreted
2 Inspect articles for special requirements
- 2.1 Special attention tags are checked and the article inspected for conformance to requirements
- 2.2 Special articles are inspected to ensure quality requirements are met
- 2.3 Articles are inspected to ensure correct packaging is used
- 2.4 Articles not meeting required standards are returned for further attention
- 2.5 Knowledge of inspection processes are applied to perform tasks
- 2.6 Team members are informed of quality issues.
RANGE STATEMENT
The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Demonstrates skills and knowledge to:
identify and confirm inspection requirements
determine process for non-conformance of standards
check special attention tags
inspect articles
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment
Context and specific resources for assessment
Assessment may occur on the job or in an appropriately simulated environment and requires access to work areas, materials and equipment and to information on workplace practices and OHS practices.
Guidance information for assessment
This unit may be assessed independently or in combination with other relevant units.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Demonstrates skills and knowledge to:
identify and confirm inspection requirements
determine process for non-conformance of standards
check special attention tags
inspect articles
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment
Context and specific resources for assessment
Assessment may occur on the job or in an appropriately simulated environment and requires access to work areas, materials and equipment and to information on workplace practices and OHS practices.
Guidance information for assessment
This unit may be assessed independently or in combination with other relevant units.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| E1363 | LMTPRDC08A | Carry out final inspection of articles | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAX18 | MSTDC2008 | Carry out final inspection of articles | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W896 | LMT31210 | Certificate III in Dry Cleaning Operations | Qualification |
| W377 | LMT31207 | Certificate III in Dry Cleaning Operations | Qualification |
| W894 | LMT21510 | Certificate II in Dry Cleaning Operations | Qualification |
| W365 | LMT21507 | Certificate II in Dry Cleaning Operations | Qualification |