Unit of competency Outline

Date retreived
22/07/2026 10:54 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Fabricate wooden components for vehicles

Fabricate wooden components for vehicles

Unit of competency
National Code
AURVTS001
State Code
AWZ25
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030507 - Automotive Vehicle Refinishing
Original Release Date
13/07/2016
Nominal Hours
40
Description
This unit describes the performance outcomes required to fabricate wooden components, plugs or moulds for use on vehicles with wooden body frames or parts, using wood material and templates. It involves preparing for the task, selecting and using wood materials and wood working equipment to fabricate wooden components, and completing workplace processes and documentation.It applies to those working in the automotive service and body industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to fabricate wooden component
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Materials are selected and inspected for quality
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Wood working tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability
  • 1.5 Work area is prepared and work is planned to identify fabrication techniques, minimise waste, and use time efficiently
2. Fabricate wooden component
  • 2.1 Drawings and specifications are interpreted and measurements taken to prepare templates to fabricate component
  • 2.2 Wooden component is fabricated using appropriate techniques and adhesives according to workplace instructions and safety and environmental requirements, and without causing damage to equipment or machinery
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and component is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF548 AURVTS3001 Carry out wood working operations for fabrication Unit of competency