Unit of competency Outline

Date retreived
22/07/2026 8:18 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Repair veneer and ply

Repair veneer and ply

Unit of competency
National Code
FWPWPP2203
State Code
AXJ49
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
13/05/2016
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
030111 - Wood MacHining And Turning
Original Release Date
05/10/2016
Nominal Hours
10
Description
This unit of competency describes the outcomes required to assess and fill single thickness veneer, panel products and manufactured plywood to an acceptable level for continued use.The unit applies to production operators and technicians who repair veneer and ply in a forest and wood products factory setting.No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for repair
  • 1.1 Review work order and where required check with appropriate personnel.
  • 1.2 Select appropriate repair and personal protective equipment and check for operational effectiveness.
  • 1.3 Obtain type and quantity of material to be repaired from veneer or plywood production process.
  • 1.4 Select filler appropriate to work order.
2. Fill material
  • 2.1 Follow organisational safety procedures throughout all repair processes.
  • 2.2 Mix filler in line with manufacturer's instructions or obtain required quantity of pre-mixed filler.
  • 2.3 Inspect veneer, panel or plywood for splits, voids and splintered or missing edges and mark for filling.
  • 2.4 Apply filler to voids and allow to dry for sanding.
  • 2.5 Apply mending tape to splits to retain veneer integrity.
3. Redistribute material
  • 3.1 Regrade repaired veneer, panel and plywood in line with organisational procedures and industry standards.
  • 3.2 Direct material to storage or processing operations in line with organisational procedures.
  • 3.3 Dispose of irreparable material and excess filler in line with environmental protection practices.
  • 3.4 Clean work area and store unused filler in line with organisational safety procedures.
  • 3.5 Record and report production outcomes to appropriate personnel.
No information
No information
Replaces
State Code National Code Title Type
D6107 FPIWPP2203B Repair veneer and ply Unit of competency