Unit of competency Outline

Date retreived
22/07/2026 1:17 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform basic engineering detail drafting

Perform basic engineering detail drafting

Unit of competency
National Code
MEM09005
State Code
OAV93
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
26/06/2019
View on TGA
State Implementation and Classification
Approved Date
Field of Education
030701 - Mechanical Engineering
Original Release Date
Nominal Hours
72
Description
This unit of competency defines the skills and knowledge required to produce drawings to AS 1100 Technical drawing or equivalent using manual drafting or drawing equipment, where the critical dimensions, associated tolerances and design specifications are predetermined.Where a computer-aided design (CAD) system is used unit MEM09009 Create 2-D drawings using computer-aided design system and MEM09010 Create 3-D models using computer-aided design system, should be selected as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 8
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Identify job requirements from specifications, job sheets or associated work instructions
2 Prepare assembly, layout and detail drafting
  • 2.1 Prepare drawings in plane orthogonal, isometric projection or equivalent, including auxiliary views and sections to AS 1100 Technical drawing
  • 2.2 Prepare layout, assembly and component drawings from specifications
  • 2.3 Apply drawing dimensions and label using supplied tolerances in accordance with AS 1100 Technical drawing
  • 2.4 Produce drawings to specification in accordance with SOPs
  • 2.5 Use standard symbols to AS 1100 Technical drawing, or equivalent, to specify requirements
3 Determine component and material requirements
  • 3.1 Identify component and material requirements according to design specifications
  • 3.2 Compile component and materials list
4 Complete documentation
  • 4.1 Complete drawings and associated documentation in accordance with SOPs
  • 4.2 Store drawings and documentation in accordance with SOPs
No information
No information
Replaces
State Code National Code Title Type
W5421 MEM09005B Perform basic engineering detail drafting Unit of competency