Unit of competency Outline
Date retreived
22/07/2026 10:15 PM AWST
22/07/2026 10:15 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Manually combine complex four-colour images
Manually combine complex four-colour images
Unit of competency
National Code
ICPPP331C
ICPPP331C
State Code
D3132
D3132
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
09/09/2014
Field of Education
030103 - Printing
Original Release Date
09/09/2014
Nominal Hours
50
Description
This unit describes the performance outcomes, skills and knowledge required to undertake advanced manual combining of colour images.
Notes
Elements and Performance Criteria
1. Plan the combining strategy and prepare the work
- 1.1. Job components are gathered and checked according to job specifications
- 1.2. Dot shapes and percentages are checked according to job specifications
- 1.3. The correct masking technique is used to combine the job economically
- 1.4. Screen rulings and angles are checked according to job specifications
- 1.5. Spotting techniques are performed accurately to achieve the required combining effect
- 1.6. Exposures and processing equipment are set up to manufacturer's specifications
- 1.7. Stipples and vignettes are laid at the correct angles and using the correct percentages
2. Combine film
- 2.1. Spreads, chokes, reverses, deep etchings and line and tone combinations are created according to job specifications
- 2.2. Colours are separated correctly according to job specifications
3. Ensure accurate registration
- 3.1. Register marks, register punch holes, centre lines and trim lines are calculated and aligned accurately according to job specifications
- 3.2. All elements are registered accurately according to design specifications
4. Apply photographic contacting
- 4.1. The basic exposures for contact, duplication and spreads and chokes are determined
- 4.2. The contact frames for contact, duplication and spreads and chokes are used correctly
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Input may include:
a variety of screened colour separations and tints and detailed job specifications.
Capture may include:
variety of image registration and contact exposure equipment suitable for darkroom or roomlight handling.
Manipulation/edit may include:
hand and photographic techniques.
Output may include:
assembled to final film and colour proofing.
Quality standards may Include:
should meet client requirements and enterprise and industry standards network configuration.
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Input may include:
a variety of screened colour separations and tints and detailed job specifications.
Capture may include:
variety of image registration and contact exposure equipment suitable for darkroom or roomlight handling.
Manipulation/edit may include:
hand and photographic techniques.
Output may include:
assembled to final film and colour proofing.
Quality standards may Include:
should meet client requirements and enterprise and industry standards network configuration.
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Evidence of the ability to:
spreads, chokes, reverses, deep etchings and line and tone combinations meet the job specifications. Colours are separated correctly and all elements registered accurately. Contact, duplication and spreads and chokes have correct exposure
the underlying skill of combining should be transferable across safelight and roomlight environments. It is important that the substrate for reproduction is identified and that the competencies be demonstrated with a clear identification of printing processes
demonstrate an ability to find and use information relevant to the task from a variety of information sources
prepare and assemble at least TWO layouts with a variety of selected image elements following the job brief and the listed Performance Criteria.
Context of and specific resources for assessment
Assessment must ensure:
assessment may take place on the job, off the job or a combination of these. Off the job assessment must be undertaken in a closely simulated workplace environment
it is expected that special purpose tools and equipment will be used where appropriate.
Method of assessment
A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:
direct questioning combined with review of portfolios of evidence and third party workplace reports of on-the-job performance by the candidate.
Guidance information for assessment
Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended.
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Evidence of the ability to:
spreads, chokes, reverses, deep etchings and line and tone combinations meet the job specifications. Colours are separated correctly and all elements registered accurately. Contact, duplication and spreads and chokes have correct exposure
the underlying skill of combining should be transferable across safelight and roomlight environments. It is important that the substrate for reproduction is identified and that the competencies be demonstrated with a clear identification of printing processes
demonstrate an ability to find and use information relevant to the task from a variety of information sources
prepare and assemble at least TWO layouts with a variety of selected image elements following the job brief and the listed Performance Criteria.
Context of and specific resources for assessment
Assessment must ensure:
assessment may take place on the job, off the job or a combination of these. Off the job assessment must be undertaken in a closely simulated workplace environment
it is expected that special purpose tools and equipment will be used where appropriate.
Method of assessment
A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:
direct questioning combined with review of portfolios of evidence and third party workplace reports of on-the-job performance by the candidate.
Guidance information for assessment
Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| D0395 | ICPPP331B | Manually combine complex four-colour images | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AUP34 | ICPPRP331 | Manually combine complex four-colour images | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| J181 | ICP30212 | Certificate III in Printing and Graphic Arts (Graphic Pre-press) | Qualification |