Unit of competency Outline

Date retreived
22/07/2026 5:41 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct operational checks on in-service mechanical plant

Conduct operational checks on in-service mechanical plant

Unit of competency
National Code
UEPOPS352
State Code
OAG79
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
31/10/2018
View on TGA
State Implementation and Classification
Approved Date
15/05/2019
Field of Education
080399 - Business And Management, N.e.c.
Original Release Date
15/05/2019
Nominal Hours
36
Description
This unit involves the skills and knowledge required to conduct operational checks on in-service mechanical plant. Mechanical plantrefers to theinfrastructureused in the operation and maintenance of power generating facilities.An operational check is the verification that a group of components are working together. An operational check consists of running in-service mechanical plant to ensure that all the systems function together safely. Competency in this unit requires the ability to plan for plant in-service checks, carry out in-service mechanical checks and complete work. Individuals will, in general, work as an operator in a power generation facility. Power generation plant operators are typically trained and authorised to isolate, prepare plant and issue permits to work.No licensing, legislative or certification requirements apply to this unit at the time of publication.Note: Workplace practiceThe application of the skills and knowledge described in this unit may require a licence or training permit to practice in the workplace where work is carried out on gas and electrical installations. Additional conditions may apply under state and territory legislative and regulatory licensing requirements.
Notes
Elements and Performance Criteria
1 Plan for mechanicalplant in-service checks
  • 1.1 Safety issues and Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations and industry standards are identified, in accordance with workplace procedures
  • 1.2 Work, in-service mechanical plant and resource requirements are identified from work orders and documentation, in accordance with workplace procedures
  • 1.3 In-service mechanical plant status and work requirements are confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
  • 1.4 Equipment is checked for correct calibration and operation and materials or components are obtained and inspected, in accordance with workplace procedures
  • 1.5 Potential hazards are identified and risk control measures are selected, in accordance with workplace procedures
  • 1.6 Pre-access checks on in-service mechanical plant are carried out, in accordance with workplace procedures and site requirements
2 Carry out in-service mechanical plantcheck
  • 2.1 In-service mechanical plant is operated, in accordance with workplace procedures and manufacturers' recommendations
  • 2.2 In-service mechanical plant checks are monitored and observed, in accordance with workplace procedures, to detect deviations from normal operation
  • 2.3 Corrective actions are taken to rectify in-service mechanical plant abnormalities, in accordance with manufacturers' recommendations and workplace procedures
  • 2.4 In-service mechanical plant checks are performed, in accordance with workplace procedures
  • 2.5 In-service mechanical plant integrity and personnel safety are maintained, in accordance with workplace procedures, and in consultation with personnel and technical and operational documentation
3 Complete work
  • 3.1 In-service mechanical plant checks are completed and control measures are returned to required operational status, where appropriate, in accordance with workplace procedures
  • 3.2 Appropriate personnel are notified of completion of work, in accordance with workplace procedures
  • 3.3 In-service mechanical plant problems or abnormalities are reported, in accordance with workplace procedures
  • 3.4 In-service mechanical plant results are interpreted and documented, in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WE372 UEPOPS352B Conduct operational checks on in-service mechanical plant Unit of competency
Replaced By
State Code National Code Title Type
ODY52 UEPOPS014 Conduct operational checks on in-service mechanical plant Unit of competency