Unit of competency Outline
Date retreived
22/07/2026 9:57 PM AWST
22/07/2026 9:57 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Solve problems in electromagnetic circuits
Solve problems in electromagnetic circuits
Unit of competency
National Code
UEENEEG001B
UEENEEG001B
State Code
W7880
W7880
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
24/09/2012
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
24/09/2012
Nominal Hours
54
Description
1) 1.1) DescriptorThis unit covers determining correct operation of electromagnetic circuits and providing solutions as they apply to electrical installations and equipment. It encompasses working safely, power circuit problems solving processes, including the use of voltage, current and resistance measuring devices, providing solutions derived from measurements and calculations to predictable problems in electromagnetic circuits.
Notes
Elements and Performance Criteria
1 Prepare to work on electromagnetic circuits.
- 1.1 OHS procedures for a given work area are identified, obtained and understood.
- 1.2 OHS risk control work preparation measures and procedures are followed.
- 1.3 The nature of the circuit(s) problem is obtained from documentation or from work supervisor to establish the scope of work to be undertaken.
- 1.4 Advice is sought from the work supervisor to ensure the work is coordinated effectively with others.
- 1.5 Sources of materials that may be required for the work are established in accordance with established procedures.
- 1.6 Tools, equipment and testing devices needed to carry out the work are obtained and checked for correct operation and safety.
2 Solve electromagnetic circuit problems.
- 2.1 OHS risk control work measures and procedures are followed.
- 2.2 The need to test or measure live is determined in strict accordance with OHS requirements and when necessary conducted within established safety procedures.
- 2.3 Circuits are checked as being isolated where necessary in strict accordance OHS requirements and procedures.
- 2.4 Established methods are used to solving circuit problems from measure and calculated values as they apply to electromagnetic circuits.
- 2.5 Unexpected situations are dealt with safely and with the approval of an authorised person.
- 2.6 Problems are solved without damage to apparatus, circuits, the surrounding environment or services and using sustainable energy practices.
3 Complete work and document problem solving activities.
- 3.1 OHS work completion risk control measures and procedures are followed.
- 3.2 Work site is cleaned and made safe in accordance with established procedures.
- 3.3 Justification for solutions used to solve circuit problems is documented.
- 3.4 Work completion is documented and an appropriate person or persons notified in accordance with established procedures.
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W6121 | UEENEEG001A | Solve problems in electromagnetic circuits | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| S7318 | UEENEEG101A | Solve problems in electromagnetic devices and related circuits | Unit of competency |