Qualification Outline

Date retreived
22/07/2026 10:50 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate III in Explosion-protected equipment overhaul

Certificate III in Explosion-protected equipment overhaul

Qualification
National Code:
UEE31907
State Code:
W441
TGA Status:
Replaced
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0313 - Electrical And Electronic Engineering And Technology
Original TGA Release Date
12/08/2009
Approved Date
11/11/2010
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
A
Nominal Hours
920
Duration
2 Semesters
Current Release Number
1.00
Current Release Date
12/08/2009
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
1.00 12/08/2009 Current Approved
Description
Schedule
Packaging Rules
The requirements for awarding this qualification are that the following are successfully achieved:
- All of the Core competency standard units;
- The required number of Stream Core competency standard units;
- The required number of Elective competency standard units as prescribed in the respective Schedule; and
- All the required prerequisites competency standard units have been met as required.

Note:
1. Prerequisites pathways shall be identified and met for all elective units selected.
2. In selecting elective units consideration to career planning advice should be given to units that form part a prerequisite pathway for the progression to achieve particular competencies or qualification at a higher level.
3. It is recommended that consideration be given to selecting from the following units in meeting the elective requirements for this qualification
UEENEEM002B Attend to breakdowns in hazardous areas
UEENEEM003B Use and maintain the integrity of fixed gas detection equipment
UEENEEM004B Install explosion-protected equipment and wiring systems
UEENEEM005B Install and maintain integrity of fixed gas detection equipment
UEENEEM006B Maintain equipment in hazardous areas
UEENEEM009B Test installations in hazardous areas
UEENEEM010B Conduct close inspection of existing hazardous areas installations
1. Core Units

All Core Competency Standard Units to be achieved.

State Code National Code Title Hours Type
W7803 UEENEEE001B Apply OHS practices in the workplace 18 Unit of competency
W7934 UEENEEG057B Conduct electrical tests on low voltage electrical machines 36 Unit of competency
W7804 UEENEEE002B Dismantle, assemble and fabricate electrotechnology components 36 Unit of competency
W7834 UEENEEE033B Document occupational hazards and risks in electrical work 18 Unit of competency
W7807 UEENEEE005B Fix and secure equipment 18 Unit of competency
W8190 UEENEEM007B Overhaul and repair explosion-protected equipment 54 Unit of competency
W7907 UEENEEG029B Overhaul and repair major switchgear / controlgear 54 Unit of competency
W7758 UEENEEC029B Participate in explosion-protected equipment overhaul work and competency development activities 20 Unit of competency
W7928 UEENEEG051B Place and connect coils 36 Unit of competency
W7940 UEENEEG064B Repair mechanical components of electrical machines 54 Unit of competency
W7929 UEENEEG052B Rewind single phase induction machines 108 Unit of competency
W7930 UEENEEG053B Rewind three phase induction machines rated for low voltage 108 Unit of competency
W7880 UEENEEG001B Solve problems in electromagnetic circuits 54 Unit of competency
W7805 UEENEEE003B Solve problems in extra-low voltage single path circuits 36 Unit of competency
W7806 UEENEEE004B Solve problems in multiple path d.c. circuits 36 Unit of competency
W7881 UEENEEG002B Solve problems in single and three phase low voltage circuits 72 Unit of competency
W7809 UEENEEE007B Use drawings, diagrams, schedules and manuals 36 Unit of competency
W7927 UEENEEG050B Wind coils 36 Unit of competency
2. Stream Core Units

At least 2 of the following competency standard units to be achieved.

State Code National Code Title Hours Type
W7811 UEENEEE009B Comply with scheduled and preventative maintenance program processes 18 Unit of competency
W7740 UEENEEC010B Deliver a service to customers 18 Unit of competency
W7731 UEENEEC001B Maintain documentation 18 Unit of competency
W8180 UEENEEK042A Participate in environmentally sustainable work practices 18 Unit of competency
W7822 UEENEEE020B Provide basic instruction in the use of electrotechnology apparatus 18 Unit of competency
W7733 UEENEEC003B Provide quotations for installation or service jobs 18 Unit of competency
W7732 UEENEEC002B Source and purchase material/parts for installation or service jobs 18 Unit of competency
W7759 UEENEED001B Use basic computer applications relevant to a workplace 18 Unit of competency
Replaces
State Code National Code Title Type
AYL5 UEE31906 Certificate III in Explosion-protected equipment overhaul Qualification
Replaced By
State Code National Code Title Type
W834 UEE31910 Certificate III in Explosion-protected equipment overhaul Qualification
VET Info Notes
This training program is a representation of the qualification code UEE31907 taken from the Electrotechnology Training Package UEE07 which should be consulted for a full description of requirements.

1. This qualification is the copyright of Department of Education, Employment and Workplace Relations.

2. Further information on this qualification is contained in the Training Package available from Australian Training Products Ltd., Tel: (03) 9655 0600 or Email: sales@atpl.net.au

3. This qualification was entered on to the STARS by CD&R on 11/11/2010.
Entry Requirements
No information
Traineeships and Apprenticeships
No information