Unit of competency Outline
Date retreived
23/07/2026 1:50 PM AWST
23/07/2026 1:50 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Use drawings, diagrams, schedules and manuals
Use drawings, diagrams, schedules and manuals
Unit of competency
National Code
UEENEEE007B
UEENEEE007B
State Code
W7809
W7809
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
01/11/2012
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
01/11/2012
Nominal Hours
36
Description
1)1.1) DescriptorThis unit covers the use of drawings, diagrams, equipment and cable schedules and manuals as they apply to the various electrotechnology work functions. It encompasses the rudiments for communicating with schematic, wiring and mechanical diagrams and equipment and cable/connection schedules, manuals, site and architectural drawings and plans showing the location of services, apparatus, plant and machinery.
Notes
Elements and Performance Criteria
1 Prepare to use drawings, diagrams, schedules and manuals.
- 1.1 Established OHS risk control measures and procedures are followed.
- 1.2 The need for drawings, diagrams, schedules or manuals is determined from the nature of the work to be undertaken.
- 1.3 Established routines and procedures are followed to obtain drawings, diagrams, schedules or manuals required for the work to be undertaken.
2 Use drawings, diagrams, schedules and manuals to obtain job information.
- 2.1 Drawings, diagrams, schedules and/or manuals are selected, appropriate to the work being undertaken.
- 2.2 Drawings, diagrams and schedules are interpreted using knowledge of drawing layouts, conventions and symbols.
- 2.3 Dimensions are extracted from drawings and diagrams for application to work undertaken.
- 2.4 Location of equipment is determined from equipment schedules and location diagrams.
- 2.5 Manuals are reviewed to ascertain their format and where information relevant to the work to be undertaken is located.
- 2.6 Information given in manuals is interpreted in relation to the work to be undertaken.
3 Use drawings, diagrams, schedules and manuals to convey information and ideas.
- 3.1 Drawing conventions are used in neat freehand drawings to convey information and ideas to others involved in the work to be undertaken.
- 3.2 Drawing conventions are used to neatly correct freehand original job drawing to show final 'as-installed' arrangement.
- 3.3 Corrected drawings are forwarded to appropriate person(s) in accordance with established procedures.
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W6051 | UEENEEE007A | Use drawings, diagrams, schedules and manuals | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| S7311 | UEENEEE107A | Use drawings, diagrams, schedules, standards, codes and specifications | Unit of competency |