Qualification Outline

Date retreived
22/07/2026 8:28 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate III in Fire Protection Control

Certificate III in Fire Protection Control

Qualification
National Code:
UEE31007
State Code:
W433
TGA Status:
Replaced
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0313 - Electrical And Electronic Engineering And Technology
Original TGA Release Date
29/07/2011
Approved Date
09/11/2010
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
A
Nominal Hours
866
Duration
2 Semesters
Current Release Number
1.00
Current Release Date
29/07/2011
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
1.00 29/07/2011 Current Approved
Description

Scope
This qualification provides competencies to select, install, set up, test, fault find, repair and maintain fire protection systems in multiple, commercial and industrial premises.

Schedule
Packaging Rules
The requirements for awarding this qualification are that the following are successfully achieved:

All of the seventeen (17) Core competency standard units;
At least two (2) Stream Core competency standard units;
A Unit Strand Total of at least thirteen (13) of Elective Competency Standard Units as prescribed in Schedule 3; and
All the required prerequisite Competency Standard Units have been met as required

Note:
1. Prerequisite pathways shall be identified and met for all elective units selected.
2. In selecting elective units considerations to career planning advice should be given to units that form part of a prerequisite pathway for the progression to achieve particular competencies or qualification at a higher level.
1. Core Competency Standard Units

All core units to be achieved.

State Code National Code Title Hours Type
W7803 UEENEEE001B Apply OHS practices in the workplace 18 Unit of competency
W8012 UEENEEH064B Commission commercial fire protection systems 36 Unit of competency
W7804 UEENEEE002B Dismantle, assemble and fabricate electrotechnology components 36 Unit of competency
W7838 UEENEEE037B Document occupational hazards and risks in electrotechnology 18 Unit of competency
W7763 UEENEED005B Enter and verify operating instructions in microprocessor equipped devices 18 Unit of competency
W8011 UEENEEH063B Enter and verify programs in preparation for commissioning fire protection systems 36 Unit of competency
W8013 UEENEEH065B Find and repair faults in fire protection systems 36 Unit of competency
W7807 UEENEEE005B Fix and secure equipment 18 Unit of competency
W7866 UEENEEF002B Lay and connect cables for multiple access to telecommunication services 72 Unit of competency
W7810 UEENEEE008B Lay wiring/cabling and terminate accessories for extra-low voltage circuits 36 Unit of competency
W7751 UEENEEC022B Participate in fire protection control work and competency development activities 54 Unit of competency
W8009 UEENEEH061B Position and terminate fire detection and warning system apparatus 36 Unit of competency
W7805 UEENEEE003B Solve problems in extra-low voltage single path circuits 36 Unit of competency
W7806 UEENEEE004B Solve problems in multiple path d.c. circuits 36 Unit of competency
W7962 UEENEEH014B Troubleshoot frequency dependent circuits 72 Unit of competency
W7809 UEENEEE007B Use drawings, diagrams, schedules and manuals 36 Unit of competency
W8010 UEENEEH062B Verify compliance and functionality of fire protection installations 36 Unit of competency
2. Stream Core Competency Standard Units

At least 2 of the following competency standard units to be achieved.

State Code National Code Title Hours Type
W7811 UEENEEE009B Comply with scheduled and preventative maintenance program processes 18 Unit of competency
W7740 UEENEEC010B Deliver a service to customers 18 Unit of competency
W7731 UEENEEC001B Maintain documentation 18 Unit of competency
W8180 UEENEEK042A Participate in environmentally sustainable work practices 18 Unit of competency
W7822 UEENEEE020B Provide basic instruction in the use of electrotechnology apparatus 18 Unit of competency
W7733 UEENEEC003B Provide quotations for installation or service jobs 18 Unit of competency
W7732 UEENEEC002B Source and purchase material/parts for installation or service jobs 18 Unit of competency
W7759 UEENEED001B Use basic computer applications relevant to a workplace 18 Unit of competency
Replaces
State Code National Code Title Type
AYK7 UEE31006 Certificate III in Fire Protection Control Qualification
Replaced By
State Code National Code Title Type
A124 UEE31011 Certificate III in Fire Protection Control Qualification
VET Info Notes
This training program is a representation of the qualification code UEE31007 taken from the Electrotechnology Training Package UEE07 which should be consulted for a full description of requirements.

1. This qualification is the copyright of Department of Education, Employment and Workplace Relations.

2. Further information on this qualification is contained in the Training Package available from Australian Training Products Ltd., Tel: (03) 9655 0600 or Email: sales@atpl.net.au

3. This qualification was entered on to the STARS by CD&R on 9/11/2010.
Entry Requirements

Not Applicable

Traineeships and Apprenticeships
(AP02080) ELECTRONIC EQUIPMENT (FIRE PROTECTION) TRADESPERSON Apprenticeship

Part-time is defined as a minimum of 20 hours per week.