Unit of competency Outline
Date retreived
23/07/2026 5:42 AM AWST
23/07/2026 5:42 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Fix and secure equipment
Fix and secure equipment
Unit of competency
National Code
UEENEEE005B
UEENEEE005B
State Code
W7807
W7807
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
24/09/2012
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
24/09/2012
Nominal Hours
18
Description
1)1.1) DescriptorThis unit covers fixing, securing and mounting techniques as apply in the various electrotechnology work functions. It encompasses the safe use of hand and portable power tools, safe lifting techniques, safe use of ladders and elevated platforms and the selection and safe application of fixing devices and supporting accessories/equipment.
Notes
Elements and Performance Criteria
1 Prepare to fix and secure equipment.
- 1.1 OHS procedures for a given work area are identified, obtained and understood.
- 1.2 OHS risk control work preparation measures and procedures are followed.
- 1.3 The scope of work to be undertaken is obtained from documentation or from work supervisor.
- 1.4 Advice is sought from the work supervisor to ensure the work is coordinated effectively with others.
- 1.5 Sources of materials that may be required for the work are identified and accessed in accordance with established procedures.
- 1.6 Fixing devices are selected for their suitable ability for the environment, the load they are to support and substratum's into which they are to be installed.
- 1.7 Supporting accessories/equipment is selected for suitability for the environment and ability to support and protect from damage that which they are intended to support.
- 1.8 Tools, equipment and testing devices needed to carry out the work are obtained and checked for correct operation and safety.
2 Install fixing and support devices.
- 2.1 Electrical isolation is arranged where work is within arm's reach of exposed conductive parts, plant or machinery in strict accordance OHS requirements and procedures.
- 2.2 Other OHS risk control measures relevant to the work site are followed.
- 2.3 Fixing devices are installed in accordance with manufacturer instructions.
- 2.4 Support accessories/equipment is install accurately and to comply with technical standards and job specifications.
- 2.5 Work is carried out efficiently without waste of materials or damage to apparatus, circuits, the surrounding environment or services and using sustainable energy principles.
3 Complete fixing and support work.
- 3.1 OHS risk control work completion measures and procedures are followed.
- 3.2 Work site is tidied and tools and equipment cleaned and securely stored.
- 3.3 Appropriate personnel are notified of the work completion.
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W6049 | UEENEEE005A | Fix and secure equipment | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| S7310 | UEENEEE105A | Fix and secure electrotechnology equipment | Unit of competency |