Qualification Outline

Date retreived
22/07/2026 7:36 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate III in Security Equipment

Certificate III in Security Equipment

Qualification
National Code:
UEE31407
State Code:
W437
TGA Status:
Replaced
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0313 - Electrical And Electronic Engineering And Technology
Original TGA Release Date
12/08/2009
Approved Date
09/11/2010
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
A
Nominal Hours
884
Duration
2 Semesters
Current Release Number
1.00
Current Release Date
12/08/2009
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
1.00 12/08/2009 Current Approved
Description
Schedule
Packaging Rules
The requirements for awarding this qualification are that the following are successfully achieved:

All of the sixteen (16) Core competency standard units;
At least two (2) Stream Core competency standard units;
A Unit Strand Total of at least seven (7) of Elective Competency Standard Units as prescribed in Schedule 3. **The Electrotechnology Training Package UEE07 must be consulted for a list of units in Schedule 3 and the Unit Strand value of units; and
All the required prerequisite Competency Standard Units have been met as required

Note:
1. Prerequisite pathways shall be identified and met for all elective units selected.
2. In selecting elective units considerations to career planning advice should be given to units that form part of a prerequisite pathway for the progression to achieve particular competencies or qualification at a higher level.
3. **In addition to Core units and Stream Core units (listed below in Groups 1 and 2) students must complete Elective units according to the rules given above.
1. Core Competency Standard Units

All core units to be achieved.

State Code National Code Title Hours Type
W7803 UEENEEE001B Apply OHS practices in the workplace 18 Unit of competency
W7998 UEENEEH050B Assemble and set up basic wired and wireless security systems 72 Unit of competency
W7804 UEENEEE002B Dismantle, assemble and fabricate electrotechnology components 36 Unit of competency
W7838 UEENEEE037B Document occupational hazards and risks in electrotechnology 18 Unit of competency
W8000 UEENEEH052B Enter instructions and test basic wired and wireless security systems 36 Unit of competency
W7807 UEENEEE005B Fix and secure equipment 18 Unit of competency
W7999 UEENEEH051B Install large wired and wireless security systems 72 Unit of competency
W7810 UEENEEE008B Lay wiring/cabling and terminate accessories for extra-low voltage circuits 36 Unit of competency
W7755 UEENEEC026B Participate in security equipment work and competency development activities 54 Unit of competency
W8003 UEENEEH055B Program and commission commercial security access control systems 54 Unit of competency
W8002 UEENEEH054B Program and commission commercial security alarm systems 54 Unit of competency
W8004 UEENEEH056B Program and commission commercial security closed circuit television (CCTV) systems 54 Unit of competency
W8001 UEENEEH053B Program and test large wired and wireless security systems 90 Unit of competency
W7805 UEENEEE003B Solve problems in extra-low voltage single path circuits 36 Unit of competency
W7806 UEENEEE004B Solve problems in multiple path d.c. circuits 36 Unit of competency
W7962 UEENEEH014B Troubleshoot frequency dependent circuits 72 Unit of competency
2. Stream Core Competency Standard Units

At least 2 of the following competency standard units to be achieved.

State Code National Code Title Hours Type
W7811 UEENEEE009B Comply with scheduled and preventative maintenance program processes 18 Unit of competency
W7740 UEENEEC010B Deliver a service to customers 18 Unit of competency
W7731 UEENEEC001B Maintain documentation 18 Unit of competency
W8180 UEENEEK042A Participate in environmentally sustainable work practices 18 Unit of competency
W7822 UEENEEE020B Provide basic instruction in the use of electrotechnology apparatus 18 Unit of competency
W7733 UEENEEC003B Provide quotations for installation or service jobs 18 Unit of competency
W7732 UEENEEC002B Source and purchase material/parts for installation or service jobs 18 Unit of competency
W7759 UEENEED001B Use basic computer applications relevant to a workplace 18 Unit of competency
Replaces
State Code National Code Title Type
AYL1 UEE31406 Certificate III in Security Equipment Qualification
Replaced By
State Code National Code Title Type
W831 UEE31410 Certificate III in Security Equipment Qualification
VET Info Notes
This training program is a representation of the qualification code UEE31407 taken from the Electrotechnology Training Package UEE07 which should be consulted for a full description of requirements.

1. This qualification is the copyright of Department of Education, Employment and Workplace Relations.

2. Further information on this qualification is contained in the Training Package available from Australian Training Products Ltd., Tel: (03) 9655 0600 or Email: sales@atpl.net.au

3. This qualification was entered on to the STARS by CD&R on 9/11/2010.
Entry Requirements
No information
Traineeships and Apprenticeships
No information