Unit of competency Outline
Date retreived
23/07/2026 5:43 AM AWST
23/07/2026 5:43 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Dismantle, assemble and fabricate electrotechnology components
Dismantle, assemble and fabricate electrotechnology components
Unit of competency
National Code
UEENEEE002B
UEENEEE002B
State Code
W7804
W7804
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
01/11/2012
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
01/11/2012
Nominal Hours
36
Description
1)1.1) DescriptorThis unit covers basic fitting and fabrication techniques as they apply in the various electrotechnology work functions. It encompasses the safe use of hand, fixed and portable power tools; cutting, shaping joining and fixing using metallic and non-metallic materials; dismantling and assembling equipment; basic mechanical measurement and marking-out and reading diagrams.
Notes
Elements and Performance Criteria
1 Prepare for dismantling, assembling and fabrication work.
- 1.1 OHS procedures for a given work area are obtained and understood through established routines and procedures.
- 1.2 Established OHS risk control measures and procedures in preparation for the work are followed.
- 1.3 Safety hazard not previously identified are reported and advice on risk control measures is sought from the work supervisor.
- 1.4 The nature of the work is obtained from documentation and from work supervisor to establish the scope of work to be undertaken.
- 1.5 Advice is sought from the work supervisor to ensure the work is coordinated effectively with others.
- 1.6 Materials required for the work are obtained in accordance with established routines and procedures.
- 1.7 Tools, equipment and measuring devices needed to carry out the work are obtained and checked for correct operation and safety.
- 1.8 Cutting tools such as drills and chisels are sharpened to suit the material on which they are to be used.
2 Dismantle and assemble electrotechnology apparatus.
- 2.1 Established OHS risk control measures and procedures for carrying out the work are followed.
- 2.2 Circuits/machines/plant are checked as being isolated where necessary in strict accordance OHS requirements and procedures.
- 2.3 Appropriate tools are selected and used correctly and safely in dismantling and assembling apparatus.
- 2.4 Manufacturer apparatus dismantling and assembling guides are used where applicable.
- 2.5 Components are marked or tagged during the dismantling to help ensure correct and efficient reassembly.
- 2.6 Dismantled components and parts are stored to protect them against loss or damage.
- 2.7 Apparatus is dismantled and assembled efficiently without waste of materials and energy and/or damage to apparatus and the surrounding environment or services.
- 2.8 Procedures for referring non-routine events to immediate supervisor for directions are followed.
- 2.9 Routine quality checks are carried out in accordance with work instructions.
3 Fabricate electrotechnology components.
- 3.1 Established OHS risk control measures and procedures for carrying out the work are followed.
- 3.2 Circuits/machines/plant are checked as being isolated where necessary in strict accordance OHS requirements and procedures.
- 3.3 Appropriate tools are selected and used correctly and safely in fabricating components.
- 3.4 Drawings and instruction for the fabrication of components are followed.
- 3.5 Component dimensions are determined directly or by calculation from information given in job drawings and instructions.
- 3.6 Components are fabricated efficiently without waste of materials and energy and/or damage to the surrounding environment or services.
- 3.7 Procedures for referring non-routine events to immediate supervisor for directions are followed.
- 3.8 Routine quality checks are carried out in accordance with work instructions.
4 Complete work and report.
- 4.1 OHS risk control work completion measures and procedures are followed.
- 4.2 Work site is cleaned and made safe in accordance with established procedures.
- 4.3 Work supervisor is notified of the completion of the work in accordance with established procedures.
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W6046 | UEENEEE002A | Dismantle, assemble and fabricate electrotechnology components | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| S7308 | UEENEEE102A | Fabricate, assemble and dismantle utilities industry components | Unit of competency |