Qualification Outline

Date retreived
22/07/2026 2:27 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate III in Rail - Communications and Networks

Certificate III in Rail - Communications and Networks

Qualification
National Code:
UEE31507
State Code:
W438
TGA Status:
Replaced
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0313 - Electrical And Electronic Engineering And Technology
Original TGA Release Date
29/07/2011
Approved Date
09/11/2010
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
A
Nominal Hours
974
Duration
2 Semesters
Current Release Number
1.00
Current Release Date
29/07/2011
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
1.00 29/07/2011 Current Approved
Description

Scope
This qualification provides competencies to select, install, commission, fault find and maintain radio and dedicated telecommunications networks in rail equipment.

Schedule
Packaging Rules
The requirements for awarding this qualification are that the following are successfully achieved:
- All of the Core competency standard units;
- The required number of Stream Core competency standard units;
- The required number of Elective competency standard units as prescribed in the respective Schedule; and
- All the required prerequisites competency standard units have been met as required.

Note:
1. Prerequisites pathways shall be identified and met for all elective units selected.
2. In selecting elective units consideration to career planning advice should be given to units that form part a prerequisite pathway for the progression to achieve particular competencies or qualification at a higher level.
1. Core Units

All Core Competency Standard Units to be achieved.

State Code National Code Title Hours Type
W7803 UEENEEE001B Apply OHS practices in the workplace 18 Unit of competency
W7950 UEENEEH002B Carry out basic repairs to electronic apparatus by replacement of components 36 Unit of competency
W7963 UEENEEH015B Develop software solutions in microcontroller based systems 54 Unit of competency
W7804 UEENEEE002B Dismantle, assemble and fabricate electrotechnology components 36 Unit of competency
W7838 UEENEEE037B Document occupational hazards and risks in electrotechnology 18 Unit of competency
W7986 UEENEEH038B Find and repair faults in complex power supplies 36 Unit of competency
W7756 UEENEEC027B Participate in rail communications and networks work and competency development activities 54 Unit of competency
W7805 UEENEEE003B Solve problems in extra-low voltage single path circuits 36 Unit of competency
W7806 UEENEEE004B Solve problems in multiple path d.c. circuits 36 Unit of competency
W7961 UEENEEH013B Troubleshoot amplifiers 54 Unit of competency
W7987 UEENEEH039B Troubleshoot basic amplifiers 36 Unit of competency
W7959 UEENEEH011B Troubleshoot d.c. power supplies with single phase input 36 Unit of competency
W7960 UEENEEH012B Troubleshoot digital subsystems 72 Unit of competency
W7962 UEENEEH014B Troubleshoot frequency dependent circuits 72 Unit of competency
W7809 UEENEEE007B Use drawings, diagrams, schedules and manuals 36 Unit of competency
2. Stream Core Units

At least 2 of the following competency standard units to be achieved.

State Code National Code Title Hours Type
W7811 UEENEEE009B Comply with scheduled and preventative maintenance program processes 18 Unit of competency
W7740 UEENEEC010B Deliver a service to customers 18 Unit of competency
W7731 UEENEEC001B Maintain documentation 18 Unit of competency
W8180 UEENEEK042A Participate in environmentally sustainable work practices 18 Unit of competency
W7822 UEENEEE020B Provide basic instruction in the use of electrotechnology apparatus 18 Unit of competency
W7733 UEENEEC003B Provide quotations for installation or service jobs 18 Unit of competency
W7732 UEENEEC002B Source and purchase material/parts for installation or service jobs 18 Unit of competency
W7759 UEENEED001B Use basic computer applications relevant to a workplace 18 Unit of competency
Replaces
State Code National Code Title Type
AYL2 UEE31506 Certificate III in Rail - Communications and Networks Qualification
Replaced By
State Code National Code Title Type
A129 UEE31511 Certificate III in Rail - Communications and Networks Qualification
VET Info Notes
This training program is a representation of the qualification code UEE30507 taken from the Electrotechnology Training Package UEE07 which should be consulted for a full description of requirements.

1. This qualification is the copyright of Department of Education, Employment and Workplace Relations.

2. Further information on this qualification is contained in the Training Package available from Australian Training Products Ltd., Tel: (03) 9655 0600 or Email: sales@atpl.net.au

3. This qualification was entered on to the STARS by CDE&R on 9/11/2010.
Entry Requirements

Not Applicable

Traineeships and Apprenticeships
(AP02130) GENERAL COMMUNICATIONS (RAIL) TRADESPERSON Apprenticeship

Part-time is defined as a minimum of 20 hours per week.