Unit of competency Outline

Date retreived
22/07/2026 1:11 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Develop conceptual models and prototypes

Develop conceptual models and prototypes

Unit of competency
National Code
AUMFTM003
State Code
WH946
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
10/01/2014
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Field of Education
030501 - Automotive Engineering
Original Release Date
11/03/2014
Nominal Hours
50
Description
This unit describes the performance outcomes required to develop and trial conceptual models and prototypes in the design, development and production of motor vehicles.It applies to those in an automotive manufacturing environment. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Determine model and prototype requirements
  • 1.1 Workplace requirements for the development of conceptual models and prototypes are confirmed
  • 1.2 Instructions and plans are interpreted to identify processes and materials needed to undertake the work
  • 1.3 Client requirements for model and prototype are confirmed with relevant personnel
  • 1.4 Approval is sought for the proposed development or modifications to conceptual model and prototype
2. Plan model and prototype-making activities
  • 2.1 Steps involved in the development or modification of the model and prototype are identified
  • 2.2 Fabrication and machining processes and instructions are determined
  • 2.3 Timetable, resource requirements, personnel, and purchase and supply schedule are confirmed
  • 2.4 Approved plan is communicated to relevant personnel
3. Prepare tools and equipment
  • 3.1 Required tools and equipment to construct or modify the model or prototype are selected and prepared for use
  • 3.2 Necessary materials and components are obtained according to design requirements
4. Produce conceptual model and prototype
  • 4.1 Model and prototypes are designed according to design plans and specifications
  • 4.2 Model and prototypes are fabricated and constructed according to plans and specifications
  • 4.3 Completed model and prototypes are compared to specification and modified as required
5. Test and modify model and prototype
  • 5.1 Model and prototypes are tested and checked against project objectives, design specifications and workplace standards
  • 5.2 Test results are analysed and action is taken where required to modify the model and prototypes
  • 5.3 Outcomes of development process and associated testing are documented and referred to relevant personnel
No information
No information
No information
State Code National Code Title Type
J832 AUM50113 Diploma of Automotive Manufacturing Qualification