Unit of competency Outline

Date retreived
22/07/2026 3:14 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install hydroponic systems

Install hydroponic systems

Unit of competency
National Code
AHCHYD304
State Code
OFF26
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
11/02/2025
View on TGA
State Implementation and Classification
Approved Date
11/08/2025
Field of Education
050301 - Horticulture
Original Release Date
11/08/2025
Nominal Hours
50
Description
This unit of competency describes the skills and knowledge required to install recirculating or non-recirculating hydroponic systems.The unit applies to individuals who install hydroponic systems under broad direction and take responsibility for their own.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace, and sustainability and biosecurity practices.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for installation
  • 1.1 Interpret site plans and design specifications
  • 1.2 Locate underground services according to site plans
  • 1.3 Identify potential site problems
  • 1.4 Identify potential hazards and risks, and implement safe working practices to manage risks
  • 1.5 Identify environmental implications of installing the system according to environment and biosecurity legislation and regulations
  • 1.6 Clear the site for installation
  • 1.7 Select tools, equipment and materials required for installation work according to design and layout plans, and check for serviceability
  • 1.8 Select, fit, use and maintain personal protective equipment (PPE) applicable to the task
2. Install a hydroponic system
  • 2.1 Prepare site for and install drainage channels and water collection and storage facilities according to design specifications
  • 2.2 Assemble system infrastructure according to design specifications
  • 2.3 Install system components according to design and layout plans and manufacturer specifications
  • 2.4 Communicate problems associated with installation to the client or manager
3. Test and calibrate the system
  • 3.1 Check infrastructure and systems are in working order and meet specifications
  • 3.2 Calibrate hydroponic equipment
  • 3.3 Test the system
  • 3.4 Complete checklist of all testing results
4. Complete installation operations
  • 4.1 Clean debris from site
  • 4.2 Dispose of or recycle waste material from site
  • 4.3 Clean, maintain and store tools and equipment
  • 4.4 Identify and report unserviceable tools and equipment according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
BAQ96 AHCHYD302 Install hydroponic systems Unit of competency