Unit of competency Outline

Date retreived
23/07/2026 12:53 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install hydroponic systems

Install hydroponic systems

Unit of competency
National Code
AHCHYD302
State Code
BAQ96
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
27/06/2016
View on TGA
State Implementation and Classification
Approved Date
12/01/2017
Field of Education
050301 - Horticulture
Original Release Date
12/01/2017
Nominal Hours
50
Description
This unit of competency describes the skills and knowledge required to install recirculating or non-recirculating hydroponic systems.It applies to individuals who take responsibility for own work and for the quality of the work of others. They use discretion and judgement in the selection, allocation and use of available resources. All work is carried out to comply with workplace procedures.No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for installation
  • 1.1 Interpret and clarify site plans and design specifications
  • 1.2 Locate underground services according to site plans
  • 1.3 Identify any potential site problems
  • 1.4 Identify environmental implications of installing the system
  • 1.5 Clear the site for installation
  • 1.6 Determine and arrange equipment and materials according to design and layout plans
2. Install a hydroponic system
  • 2.1 Prepare site for and install drainage channels and water collection, and storage facilities according to design specifications
  • 2.2 Assemble system infrastructure according to design specifications
  • 2.3 Install system components according to design and layout plans and manufacturers specifications
  • 2.4 Communicate problems associated with installation to the client or manager
3. Test and calibrate the system
  • 3.1 Check infrastructure and systems are in working order and meet specifications
  • 3.2 Calibrate hydroponic equipment
  • 3.3 Install growing media
  • 3.4 Test the system
  • 3.5 Complete check list of all testing results
4. Complete installation operations
  • 4.1 Clean and store all tools and equipment
  • 4.2 Tidy site and remove and dispose of waste
No information
No information
Replaces
State Code National Code Title Type
D6837 AHCHYD302A Install hydroponic systems Unit of competency
Replaced By
State Code National Code Title Type
OFF26 AHCHYD304 Install hydroponic systems Unit of competency