Unit of competency Outline

Date retreived
22/07/2026 8:22 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Use canvas and sail production tools

Use canvas and sail production tools

Unit of competency
National Code
MSTTF2017
State Code
OEZ69
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
22/12/2022
View on TGA
State Implementation and Classification
Approved Date
03/07/2023
Field of Education
030717 - Plant And Machine Operations
Original Release Date
03/07/2023
Nominal Hours
45
Description
This unit describes the skills and knowledge required to safely operate a range of hand and power tools commonly used in the manufacture of canvas and sail products. It applies to hand, electrical and air energised tools. This unit applies to individuals working in accordance with pre-determined specifications and established procedures. No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Prepare to use canvas and sail production tools
  • 1.1 Identify task requirements and related processes, materials and working environment for use of tools from work documentation
  • 1.2 Select appropriate tools for the work tasks to be performed
  • 1.3 Plan work with tools to ensure required environmental protection and to maximise safety and efficiency
2. Prepare safe work area for using tools
  • 2.1 Clear and clean work area, removing obstructions and allowing clear access to machines and equipment
  • 2.2 Eliminate solvents and other sources of flammable or explosive vapours and remove flammable materials if tools likely to produce sparks or flame are used
  • 2.3 Identify suitable electrical power outlets based on work requirements
  • 2.4 Use barriers or screens to keep other personnel at a safe distance
  • 2.5 Use suitable floor insulation or residual current devices where electrical tools are to be used in conditions which could present a shock hazard
  • 2.6 Confirm emergency shutdown is provided for tool
3. Use tools
  • 3.1 Mount work piece in appropriate tool or machine and anchor securely to prevent movement based on its characteristics
  • 3.2 Use equipment and tools in accordance with workplace health and safety procedures
  • 3.3 Follow procedures to safely connect, start up and shutdown powered tools
  • 3.4 Set mechanical and electrical tool settings to reflect work requirements
  • 3.5 Ensure safe state, position and location of tools in the work area when not in immediate use
  • 3.6 Monitor tool operation and discontinue use if abnormal operation or other problems are detected
  • 3.7 Inspect work for compliance against specifications and quality standards and rectify any deficiencies
4. Maintain tools and work area
  • 4.1 Clean and store tools and accessories in accordance with workplace procedures and safety requirements
  • 4.2 Report abnormal tool operation or other problems in accordance with workplace procedures
  • 4.3 Perform routine operator maintenance in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
BAU66 MSTTF2003 Use canvas and sail production tools Unit of competency