Unit of competency Outline

Date retreived
22/07/2026 3:52 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct civil construction excavator operations

Conduct civil construction excavator operations

Unit of competency
National Code
RIIMPO320F
State Code
OAK55
TGA Status
Current
DTWD Status
Approved
Current Release Number
4.00
Current Release Date
21/09/2021
View on TGA
State Implementation and Classification
Approved Date
27/03/2019
Field of Education
030717 - Plant And Machine Operations
Original Release Date
27/03/2019
Nominal Hours
160
Description
This unit describes the skills and knowledge required to operate excavator operations to lift carry and place materials.This unit applies to those working in site based roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors, and must be sourced from state jurisdictions prior to applying this unit.This unit alone does not provide sufficient skill to independently load and unload equipment. To perform this activity safely, personnel must either complete or be assisting someone who has completed RIIHAN308F Load and unload plant or equivalent.
Notes
Elements and Performance Criteria
1. Plan and prepare for excavator operations
  • 1.1 Access, interpret and apply excavator operations documentation
  • 1.2 Obtain, interpret, clarify and confirm work requirements
  • 1.3 Identify hazards and environmental issues, assess the risks and implement control measures in line with workplace policies
  • 1.4 Select and wear personal protective equipment required for work activities
  • 1.5 Obtain, identify and implement traffic management signage requirements according to standard operating procedures and safe work practices
  • 1.6 Select required excavator equipment and/or attachments and confirm suitability for work activities
  • 1.7 Obtain and interpret emergency procedures for excavators, and be prepared for fires, accidents and emergencies
  • 1.8 Coordinate and communicate planned activities with others at the site prior to commencement of work activity
2. Operate excavator in line with established requirements
  • 2.1 Carry out prestart and start-up checks in line with workplace procedures
  • 2.2 Identify faults or defects and rectify or report within scope of own responsibility and according to workplace procedures
  • 2.3 Drive and operate excavator using techniques suited to equipment capabilities, site and work conditions, and according to workplace procedures
  • 2.4 Monitor hazards and risks during operations, and ensure safety of self, other personnel, plant and equipment
  • 2.5 Monitor and manage equipment performance using indicators and alarms in line with manufacturers’ specifications
3. Lift, carry and place materials to complete work activity
  • 3.1 Establish weight of load and ensure it is within safe operational limits of the machine
  • 3.2 Use lifting gear within safe working load requirements and in line with workplace requirements
  • 3.3 Position machinery and ensure stable and effective shift of materials according to work requirements
  • 3.4 Shift load safely and effectively, using hand, audible and communication signal, in line with workplace procedures
  • 3.5 Park up, shut down, secure and carry out post operational inspection of equipment in line with workplace procedures
4. Select, remove, fit and use attachments for a excavator
  • 4.1 Select attachment for the task
  • 4.2 Fit attachment in line with workplace procedures
  • 4.3 Test attachment and ensure correct fitting and operation
  • 4.4 Use attachment within design limits and in accordance with workplace procedures
  • 4.5 Remove, clean and store attachments in designated location in line with workplace procedures
5. Prepare to relocate the excavator
  • 5.1 Prepare excavator for relocation
  • 5.2 Move excavator safely within and/or between work areas, observing relevant codes and traffic management requirements
  • 5.3 Assist loading and unloading machine from float/trailer as required by workplace procedures
6. Conduct housekeeping activities
  • 6.1 Clear work area and dispose of or recycle materials according to workplace procedures
  • 6.2 Manage and/or report hazards to maintain a safe working environment
  • 6.3 Complete and file or distribute documentation in a manner that complies with workplace practices
No information
No information
Replaces
State Code National Code Title Type
AWB55 RIIMPO320E Conduct civil construction excavator operations Unit of competency