Unit of competency Outline

Date retreived
22/07/2026 3:15 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Carry out spot welding

Carry out spot welding

Unit of competency
National Code
AURVTW105
State Code
OCI79
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
13/11/2020
View on TGA
State Implementation and Classification
Approved Date
31/03/2021
Field of Education
030711 - Boilermaking And Welding
Original Release Date
31/03/2021
Nominal Hours
20
Description
This unit describes the skills and knowledge required to carry out spot welding to replace structural and non-structural vehicle body sections according to original equipment manufacturer (OEM) or authorised agency procedures. It involves preparing for the task, selecting and using spot welding equipment, adjusting spot welder, operating spot welder, selecting and using suitable personal protective equipment (PPE), inspecting and testing weld quality, and completing workplace processes and documentation. This unit applies to those working in the automotive service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for spot welding
  • 1.1 Determine job requirements from workplace instructions
  • 1.2 Access and interpret welding information
  • 1.3 Select and inspect materials for repairs and replacements for quality
  • 1.4 Identify hazards associated with the work and manage risks
  • 1.5 Select and check tools and equipment for serviceability
  • 1.6 Prepare work area and plan work to conduct and test spot welds, minimise waste, and use time efficiently
2. Carry out spot welding activities
  • 2.1 Prepare surfaces for spot welding and apply anti-corrosion coatings prior to spot welding
  • 2.2 Set up and adjust welding equipment for specific welding job requirement following OEM or authorised agency repair guidelines
  • 2.3 Perform and destructive test sample spot welds
  • 2.4 Carry out welding using welding equipment according to workplace procedures and safety and environmental requirements
  • 2.5 Complete spot welding without causing damage to components or systems
  • 2.6 Inspect completed spot welds for quality, and rectify identified faults as required according to workplace procedures
3. Complete work processes
  • 3.1 Conduct final inspection according to workplace procedures and confirm vehicle is ready for use
  • 3.2 Clear work area and dispose of or recycle materials according to workplace procedures
  • 3.3 Complete documentation according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
AWY97 AURVTW005 Carry out spot welding Unit of competency